Sanitary pumps

Connection selection guide
Sanitary pumps
Selection of connection according to pump type
The table below is intended as a general guide. Selection of connection often depends on local conditions.
Type
Connection
Rated
pressure
Standard
Sanitary standard
3A0
3A1
3A2
3A3
Euro-HYGIA ® I
Euro-HYGIA ® II
F&B-HYGIA ® I
F&B-HYGIA ® II
Pump type
Contra I
Contra II
durietta 0
SIPLA
MAXA
MAXANA
NOVAlobe*
Threads
Flanges
Clamps
Aseptic threaded connection PN 25-40 DIN 11864-1 ● ● ● ● ❍ ❍ ❍ ❍ ❍ ❍ ●
Threaded connection PN 16-40 DIN 11851 ● ● ● ● ● ● ● ● ● ● ●
Threaded connection, SMS ISO 2037 ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Threaded connection, DS ISO 2037 ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Threaded connection, RJT BS4825-5 ● ● ❍ ❍ ❍ ❍ ❍ ●
Threaded connection, IDF
ISO 2853
BS4825-4
● ● ❍ ❍ ❍ ❍ ❍
Threaded connection (male), GAZ PN 10 DIN ISO 228 ● ❍ ❍ ❍ ❍ ❍ ❍
Tapped connection (female) PN 10 DIN EN 10226-1 ● ❍
Aseptic flange PN 10-25 DIN 11864-2 ● ● ● ● ❍ ❍ ❍ ❍ ❍ ❍ ●
Flange, APV-FN1/APV-FG1 PN 10 APV ● ● ❍ ❍ ❍ ❍ ❍
Flange PN 10 DIN EN 1092-1 ● ❍ ❍ ❍
Flange PN 16 DIN EN 1092-1 ● ❍ ❍ ❍ ❍ ❍ ●
Kremo flange PN 10 DIN EN 1092-1 ● ❍ ❍ ❍ ❍ ❍ ❍
Kremo flange PN 16 DIN EN 1092-1 ● ● ●
Flange, ANSI 150 LB RF PN 10-16 ANSI ● ● ● ● ● ●
Clamp DIN 32676 ● ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ●
Clamp
ISO 2852
BS4825-3
● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Clamp, Tri-Clamp ® /Tri-Clover ® ASME BPE ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Clamp, ISO ● ● ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Clamp, SMS ● ● ● ● ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Stub DIN 11850 ● ● ● ● ● ● ● ● ● ● ● ●
* See the NOVAlobe data booklet
● Standard
❍ Available on request
29