Accu-Chek Smart Pix - ACCU-CHEK Insulin Pumps

Chapter 2, Installing the Accu-Chek Smart Pix system
i
These settings, unlike any other settings, must be
saved immediately in a text file on the removable disk
(Accu-Chek Smart Pix), as described below. If you
leave this page (e.g. by clicking on another link or
closing the browser) without saving your selection,
any change you have made will have no effect.
As soon as you click on the Save button in the Personal Setup
window, another window opens in the browser showing text
which contains your settings for this area. Now proceed as
follows:
• Click the Save link beneath the text or
• select the Save as… command from the File menu
In the next dialog box, select the storage location, the name
and other file attributes:
• Select removable disk (Accu-Chek Smart Pix) as
storage location.
• The following settings are defaults and must not be
changed (if displayed):
– Name “Settings”
– File type “Text file (*.txt)”
– Code “Unicode (UTF-8)”
• If all entries are correct, click on the Save button and
close the text window via the close box (top right
of the window).
The text file created in this manner is read by the Accu-Chek
Smart Pix system, and all entries are adopted as settings for
the Accu-Chek Smart Pix system (until they are changed
again). The file is then deleted.
2-10 Accu-Chek Smart Pix user's manual