Accu-Chek Smart Pix - ACCU-CHEK Insulin Pumps
Accu-Chek Smart Pix - ACCU-CHEK Insulin Pumps
Accu-Chek Smart Pix - ACCU-CHEK Insulin Pumps
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3, Preparing the devices<br />
3.15 <strong>Accu</strong>-<strong>Chek</strong> Spirit insulin pump<br />
The <strong>Accu</strong>-<strong>Chek</strong> Spirit insulin pump has a built-in infrared<br />
port for data transfer. In order to read data from these<br />
devices, proceed as follows:<br />
• Place the device no more than 10 cm away from the<br />
infrared window on the <strong>Accu</strong>-<strong>Chek</strong> <strong>Smart</strong> <strong>Pix</strong> device.<br />
Both infrared windows must be facing one another.<br />
15:29 26.05<br />
• Make sure that your <strong>Accu</strong>-<strong>Chek</strong> Spirit insulin pump is<br />
in STOP mode.<br />
DATA<br />
COMMUNICATION<br />
• Press the button repeatedly until the DATA<br />
COMMUNICATION function is displayed.<br />
DATA TRANSFER<br />
• Confirm the selection with the button. The builtin<br />
infrared port is now activated, and data transfer<br />
starts automatically.<br />
When data transfer has been completed and the report is<br />
displayed on the screen:<br />
• Press the button to quit data transfer mode.<br />
• Resume operation of the insulin pump (RUN mode)<br />
so as not to interrupt the supply of insulin according<br />
to your basal rate for longer than necessary.<br />
3-18 <strong>Accu</strong>-<strong>Chek</strong> <strong>Smart</strong> <strong>Pix</strong> user's manual
Change language