Manual 31 Guidelines for calibrating a binder distributor ... - Aapaq.org
Manual 31 Guidelines for calibrating a binder distributor ... - Aapaq.org
Manual 31 Guidelines for calibrating a binder distributor ... - Aapaq.org
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The angle of the long axis of the nozzle openings is set so that the<br />
spray fans will not interfere with each other. The nozzle angle varies<br />
according to the make of <strong>distributor</strong> and normally range between 15<br />
and 30 degrees. The various manufacturers usually furnish special<br />
wrenches <strong>for</strong> setting the angle of the nozzles. The use of these<br />
wrenches is recommended, as it is extremely difficult to obtain a<br />
uni<strong>for</strong>m spread with a visually set nozzle.<br />
Figure 10:<br />
Illustration showing the measurement of the nozzle angle<br />
Figure 11: Nozzle set at recommended angle<br />
18
Change language