Manual 31 Guidelines for calibrating a binder distributor ... - Aapaq.org

APPENDIX E
Check list before spraying commences on site
Distributor Identification Number
No. Item Yes No
1.1 Does the distributor have a valid Calibration
Certificate
• Was the calibration issued by a SANAS
accredited facility
• Is the certificate within its validity period
• Does the certificate specify which
components of the distributor have been
calibrated and is there proof of calibration
from an accredited facility that other
components have also been calibrated and
are their certificates valid
1.2 Check the Modification and maintenance log:
are all modifications acceptable and recorded
and have these modifications been re-calibrated
(If deemed necessary) and is there proof of it in
the logbook.
1.3 Check if all the relevant equipment mentioned in
the above two items correspond (In terms of
identification) to the respective certificates of
calibration.
1.4 Inspect the 'Bucket' Test record.
1.5 Inspect the Performance log.
1.6 Has the distributor inspection check been carried
out successfully (see Appendix A).
1.7 After inspection of the 'Bucket Test' record and
the Performance log; does the client or his agent
require that a 'Bucket Test' be done
... continued overleaf
43