English - Summa Online
English - Summa Online
English - Summa Online
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Summa</strong>Cut Series Cutters<br />
User’s Manual<br />
• Place the cross-mark indicating the Y-axis (only when using the XY-<br />
Alignment and the XY-Adjustment method):<br />
Y-Axis point<br />
♦ Make sure that the cross-mark is placed exactly above the origin<br />
marker.<br />
♦ The exact distance between the two points that are indicated<br />
by this marker and the origin must be known (only when using<br />
the XY-Adjustment method). Do not measure these distances on<br />
the print-out, but measure them in the software.<br />
⇒ Place the markers as far as possible from each other for maximum<br />
accuracy.<br />
5.5. PRINT THE DESIGN<br />
• Print the markers and the design with your printer.<br />
• When printing on a roll, make sure that the orientation is as follows:<br />
X-Axis point<br />
Y-Axis point<br />
Origin point<br />
♦ Make sure that there is at least 1 cm, preferably 2cm margin<br />
(0.4”, preferably 0.8”) on each side.<br />
• When printing on sheets or cutting off your print from the roll, make sure<br />
that there is a margin of at least 8 cm (3.15”) at the end of the sheet:<br />
Contour Cutting 5-6