Vessels catalogue (complete) - Juchheim Laborgeräte GmbH

Reaction vessels for vacuum and pressure
All information is for the standard vessel, gaskets and glasses are consumables
Components of standard vessel – PTFE gaskets
Description Size No. Cat. no.
Vessel with
Heating jacket 30.5 ltr 1 10163.01
Lid gasket ∅ 343 x ∅ 325 x 2 1 20345.31
Bolts M16 x 80 A2-70 15
Nuts M16 A2-70 15
Washers ∅ 17 A2 15
Drain plug M24 x 1,5 1 10334.00
Drain plug gasket ∅ 34 x ∅ 24 x 1 1 20337.21
Stirrerhead gasket ∅ 56 x ∅ 49 x 1 1 20337.41
Stirrerhead 1 10312.00
‘O’ ring ∅ 15 x 4 2 20312.04
Double universal joint 8 x 8 1 20441.00
Shield 1 20447.00
Anchor stirrer 1 10315.70
Thermometer pocket, closed 1 20465.27
Gasket for M24 ports ∅ 30 x ∅ 24 x 1 4 20337.11
Adaptor M24 - 1/2" BSP 1 20461.11
Gasket, 1/2" BSP ∅ 18 x ∅ 12 x 1 1 20336.51
Excess pressure valve 6 Bar, 1/2" BSP 1 21453.06
Adaptor M24 - 1/4" BSP 1 20461.21
Gasket, 1/4" BSP ∅ 11 x ∅ 6 x 1,5 1 20336.13
Pressure gauge –1 to 5 Bar 1 20460.00
Plug, M24 ports M24 x 1,5 1 20463.21
Plug, M33 ports M33 x 1,5 2 20463.31
Gasket for M33 ports ∅ 40 x ∅ 34 x 2 2 20337.31
Illumination glass, DN30 ∅ 40 x 10 1 20466.47
Flange, DN30 1 20467.03
Gasket for DN30 flange ∅ 40 x ∅ 30 x 1 2 20336.71
Sightglass, DN48 ∅ 60 x 10 1 20466.67
Flange, DN48 1 20467.05
Gasket for DN48 flange ∅ 60 x ∅ 50 x 1 2 20337.61
Klingersil gaskets
Description Size Cat. no.
Lid gasket ∅ 343 x ∅ 325 x 2 20345.34
Drain plug gasket ∅ 34 x ∅ 24 x 2 20337.24
Gasket for M24 ports ∅ 30 x ∅ 24 x 2 20337.14
Gasket for M33 ports ∅ 40 x ∅ 34 x 2 20337.34
Gasket, 1/2" BSP ∅ 18 x ∅ 12 x 2 20336.54
Gasket for DN30 flange ∅ 40 x ∅ 30 x 2 20336.74
Gasket for DN48 flange ∅ 60 x ∅ 50 x 2 20336.64
Stirrerhead gasket ∅ 56 x ∅ 49 x 1 20337.44
Gasket sets, options and accessories
Description Size Cat. no.
Set of 14 gaskets PTFE 20365.30
Set of 14 gaskets Klingersil 20360.30
Mechanically sealed stirrerhead M48 x 1,5 10309.50
Magnetic stirrerhead M48 x 1,5 10313.00
Double universal joint, stainless steel 8 x 8 20441.11
Vessel insulation 10163.90
Drain with ball valve* 15 ... 50
Drain valve, straight outlet M24 x 1,5 10333.1*
Drain valve, lateral outlet M24 x 1,5 10335.0*
Pt100 thermometer for closed pocket EL420 52009.50
Thermometer holders
- open with dip tube 20465.41
- open without dip tube 20465.51
Pt100 direct immersion thermometer EL375 52009.30
Bottom Pt100 thermometer mounted in
vessel bottom* EL50 15009.00
Vycor glass, DN30 ∅ 40 x 10 20466.49
Vycor glass, DN38 ∅ 60 x 10 20466.69
* available only as original equipment
Custom design with a second stirrerhead in the lid
The drawing shows a 5 litre vessel
with a centrally mounted 16 Nm
magnetic stirrerhead and a sloping
mechanically sealed stirrerhead to
one side.
The magnetic stirrerhead is fitted
with an anchor stirrer and the
lateral stirrerhead is fitted with a
dispersion disk.
Both stirrers can be used simultaneously.
The view from above the
vessel shows the constrained
layout.
21