Vessels catalogue (complete) - Juchheim Laborgeräte GmbH

Stirrerheads
‘O’ and oil film sealed stirrerhead
• For use up to 350 °C
• For vacuum and pressures up to 25 Bar
• See pages 57–61 for description
Lowest cost option for undemanding applications. It
requires constant attention and, at higher pressures,
frequent maintenance. The ‘O’ ring imposes a high
and variable counter-torque on the shaft.
Hence it is unsuitable for use with the torque measurement
unit.
Mechanically sealed stirrerhead
• For use up to 350 °C
• For vacuum and pressures up to 50 Bar at
4 000 rpm.
• See pages 62–67 for description
This triple ball bearing stirrerhead is practically
maintenance free. Years of use without maintenance
are normal. Pressure has no effect on the shaft
counter-torque. The counter-torque varies from
0.2 Nm at 100 rpm to 0.9 Nm at 4 000 rpm.
Magnetically coupled stirrerhead
• For use up to 350 °C
• For vacuum and pressures up to 50 Bar (special
versions available for up to 150 Bar 1 600 rpm)
• See pages 68–75 for description
This stirrerhead has a static seal. No gasket comes
into contact with moving parts. Pressure has no effect
on the shaft counter-torque. The counter-torque
varies from 0.2 Nm at 100 rpm to 1.5 Nm at 1 500 rpm.
Inertgas
or
oder vacuum Vakuum
56