Vessels catalogue (complete) - Juchheim Laborgeräte GmbH

Custom and special purpose vessels
Tube-and-shell and Liebig condensers
Tube-and-shell condenser
Tube-and-shell condensers are manufactured entirely
from 316 stainless steel and are suitable for use
under vacuum as well as at pressures up to 25 Bar.
Input and output connections: DN15 welding connectors.
They are inclined 5° towards the outlet.
Coolant connections: Male M18 x 1.5. Fitted with Ø12
mm hose connections for pressures up to 10 Bar.
The condensers are available in two sizes:
• 1.2 litres, 0.16 m² cooling surface, coolant volume
approx. 0.9 litres
• 1.6 litres, 0.32 m² cooling surface, coolant volume
approx. 1.7 litres
Item
Cat. no.
Tube-and-shell condenser, surface area 0.16 m²
PTFE gaskets 10480.01
Klingersil gaskets 10480.04
Tube-and-shell condenser, surface area 0.32 m²
PTFE gaskets 10481.01
Klingersil gaskets 10481.04
5°
~ 266 (10480.00)
~ 444 (10481.00)
∅18x1.5
Gaskets for tube-and-shell condenser (1993 on)
PTFE 20481.11
Klingersil 20481.14
Gaskets for tube-and-shell condenser (up to 1992)
PTFE 10480.11
(old design with threaded rods)
Gaskets and glasses are consumables
Liebig condenser
Liebig condensers are manufactured from 316 stainless
steel. If the upper outlet is closed off, they are
suitable for use at pressures up to 25 Bar as well as
vacuum.
Vapour inlet is a B29 cone with a cap nut. This ensures
a pressure tight connection to the reaction
vessel.
Inner tube ∅ 18 x 1.5 mm, outer diameter 60.3 mm.
Coolant connections: Male M18 x 1.5. Fitted with
∅ 12 mm hose connections for pressures up to 10 Bar.
725
∅60.3
Item
Cat. no.
Liebig condenser
B29 inlet, open outlet 10471.10
Liebig condenser
DN15 tube connectors 10471.20
NS29
10471.10
35