Vessels catalogue (complete) - Juchheim Laborgeräte GmbH

Accessories
Lateral connections and inbuilt Pt100 thermometers (Only available as original equipment)
Example of a custom vessel with a sampling facility.
The drawing shows a vessel body fitted with
screwed-in outlet valve 10335.00 and sampling outlet
to one side. The sample collector is heated and has a
volume of about 50 ml. The sample is fed into the
collector through DN15 ball valves.
A sample collector for viscous products can be
attached to the M24 thread on the outlet of the drain
valve. Further details on request.
Lateral connections to vessels.
They can be fitted to vacuum vessels, pressure vessels,
or reservoirs. Fitted with PTFE gaskets for use up
to 250 °C.
Thread (BSP) Vessel size* Cat. no.
[mm]
[ltr]
1/4" – ∅ 4 1 upwards 15014.00
3/8" – ∅ 6 1 upwards 15038.00
1/2" – ∅ 10 2 upwards 15012.00
3/4" – ∅ 15 5 upwards 15034.00
*Other sizes on request
∅6
3/8" BSP
15038.00
Pt100 thermometers in vessel bottom
A measurement point that takes a Pt100 thermometer
can be fitted to the bottom of the vessel. The Pt100
thermometer has a pressure tight housing and 1.6 m
long connection cable. The gaskets are so arranged
to allow the amount of protrusion of the thermometer
into the vessel to be adjusted.
Cat. no.
Assembly including thermometer 15009.00
Replacement thermometer with
1.6 m cable 52009.01
Gasket set, PTFE, three pieces 15009.11
Gasket set, Klingersil, for use to 400 °C 15009.14
15009.00
39