Vessels catalogue (complete) - Juchheim Laborgeräte GmbH

Accessories
Drain valves and accessories, stainless steel
Item
Cat. no.
Drain plug, with knobs
Standard vessel fitting 10334.00
Drain valve, straight outlet
Fitted with a metal to metal seal. The outlet at the
lower end is not suitable for connection to pipework.
M24 x 1.5 10333.10
M33 x 1.5, sealing cone B29 10333.20
10334.00
Drain valve, straight outlet, with PTFE seal
Fitted with a PTFE ring to provide a gas tight seal.
For use up to 250 °C.
10333.11
Drain valve, lateral outlet
Fitted with a metal to metal seal. Pressure tight to
50 Bar. Outlet is threaded M24 x 1.5 male. Suitable
for connection to pipework.
10335.00
As 10335.00, but heated 10335.10
10333.10
Drain valve, lateral outlet, with PTFE seal
Fitted with a PTFE ring to provide a gas
tight seal. For use up to 250 °C. 10335.01
Straight connector for valve 10335.00
With cap nut and olive, 18 mm external diameter
PTFE seal 10335.51
Klingersil seal 10335.53
10335.00
Elbow connector for valve 10335.00
With cap nut and olive, 18 mm external diameter
PTFE seal 10335.61
Klingersil seal 10335.63
Drain valve, ball type
With welded on flange. Very low dead space when an
anchor stirrer is used. Seals made from PTFE. For use
up to 250 °C.
Available only as original equipment.
DN 15 10336.15 DN 32 10336.32
DN 20 10336.20 DN 40 10336.40
DN 25 10336.25 DN 50 10336.50
10335.5*
10335.6*
10336.15 to 10336.50
Available only as original equipment
38