Vessels catalogue (complete) - Juchheim Laborgeräte GmbH

Torque measurement
Torque measurement
• Stirrer shaft torque is measured using a noncontact
torque sensor, whose output is independent
of the shaft rotation speed.
• Torque measurement range 2 - 50 Nm, with 1.5
overload margin. Can be statically calibrated.
Tachometer range 800 to 6 000 rpm.
• Compact housing containing a photoelectric
tachometer sensor. With maintenance-free bearings
and connection cable.
Display unit in a bench cabinet or a 19" 3HE rack
mounting to DIN 41 494.
• Contains power supply for sensors and signal
handling system.
• Power supply 230 V / 50 Hz
• Signal processing system has controls for setting
gain and zero. LED power on indicator, digital
displays of torque and rotation speed. Two
switchable torque ranges: x1 and x10.
• Outputs: ± 0 - 10 V DC or 4 - 20 mA (0 - 20 mA)
current loop for both torque and rotation speed.
Sensor unit
Supply voltage 24 V DC
• Torque output: ± 10 V, Tachometer output: 360
impulses / revolution
• Includes connection cable, but not the display
unit.
Nominal Max speed Cat. no.
torque
[Nm]
[rpm]
2 8000 35510.02
5 8000 35510.05
10 8000 35510.10
20 6000 35510.20
50 6000 35510.50
Nominal Max speed Cat. no.
torque
[Nm]
[rpm]
2 8000 35500.02
5 8000 35500.05
10 8000 35500.10
20 6000 35500.20
50 6000 35500.50
Rack mounted version can is installed in a cabinet
800 x 800 x 350 mm
• With connection cable. All 0 - 10 V DC or 4 - 20 mA
(0 - 20 mA) outlets brought to the outside.
• Cabinet fully wired.
Cat. no.
35501.00
54