Vessels catalogue (complete) - Juchheim Laborgeräte GmbH
Vessels catalogue (complete) - Juchheim Laborgeräte GmbH
Vessels catalogue (complete) - Juchheim Laborgeräte GmbH
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stirrerheads<br />
’O’ ring sealed stirrerhead, shaft diameter 10 mm<br />
6x6<br />
28<br />
Oil reservoir<br />
164<br />
Inert gas<br />
Cooling water<br />
outlet<br />
Cooling water<br />
inlet<br />
Oil reservoir<br />
∅40<br />
18 2<br />
16<br />
28<br />
Stirrer<br />
Product<br />
∅10<br />
M33x1.5<br />
• Uses an oil film controlled by an ‘O’ ring for sealing<br />
the shaft<br />
• Suitable for pressures up to 25 Bar<br />
• All parts in contact with product protected against<br />
corrosion<br />
• Suitable for use up to 350 °C with cooling<br />
• Suitable for light duty application in vessels from<br />
1–2 litres capacity<br />
• Standard equipment for 1–2 litre JUVO vessels<br />
Recommended zone of application<br />
(Pressure v Rotation speed)<br />
rpm<br />
1400<br />
1050<br />
700<br />
350<br />
UPM<br />
Pressure 10 20 [Bar]<br />
Item<br />
Cat. no.<br />
Stirrerhead with ‘O’ ring seal<br />
Shaft diameter 10 mm,<br />
threaded M33 x 1.5 10310.00<br />
Item<br />
Cat. no.<br />
Stirrerhead with ‘O’ ring seal<br />
Stainless steel with a PTFE bearing<br />
Threaded M33 x 1.5 10310.11<br />
57