Vessels catalogue (complete) - Juchheim LaborgerÃ¤te GmbH

More documents

Recommendations

Info

Accessories Fittings and spare parts This section is divided into three parts • Fittings to pressure vessels that are supplied as original equipment. Retrofitting such items requires considerable extra outlay. • Removable fittings to existing connections or ports, which might be required through changes in application. Such items are adaptors, valves, drains and safety equipment. In cases of doubt, please contact us, quoting the serial number of the vessel concerned. L1 18 L2 • Consumables This heading includes fittings, gaskets, bolts, glasses and special tools. Only those parts that are suitable and approved for use with the particular vessel should be used. In cases of doubt, please contact us, quoting the serial number of the vessel concerned. Anzeigebereich: -1-0-16 bar Kl.0,5 1.4571 Ausgang 4 ... 20 mA - + -1- -2- Grenzwert 1/2" BSP Materials Unless otherwise noted, all spare parts listed in this <strong>catalogue</strong> are made from 316 (1.4571) stainless steel. Sightglasses are made from either borosilicate glass or Vycor. Gaskets are available in PTFE, Klingersil, Gylon and other materials. Certification Certification to EN 10204 3.1B is available for practically all components made from 316 stainless steel and borosilicate glass. A charge will be made for such certification. If special documentation is required, please contact us before ordering. Material Germany: 1.4571 DIN x 10 CrNiMoTi 18 10 USA: AISI 316 Ti Great Britain: BS 320 S 17 France: AFNOR Z 8 CND Ti 18-12 Sweden: SIS 2350 Zeugnis Certification EN 10204 3.1B Lorem ipsum Dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum 36
Accessories Sightglasses for vessel bodies (original equipment only) Rectangular sightglasses These can be installed in vacuum vessels, pressure vessels or reservoirs. The PTFE gaskets are stable up to 250 °C. Suitable for vacuum and pressures up to 25 Bar. L1* Vessel size L2 Cat. no. [mm] [ltr] [mm] 68 1 upwards 79 11068.00 79 2 upwards 95 11079.00 124 5 upwards 140 11124.00 * Other sizes on request Gaskets L1 Dimensions L2 Cat. no. [mm] [mm] 68 79 x 68 x 34 x 2 79 21068.02 79 95 x 79 x 34 x 2 95 21079.02 124 140 x 124 x 34 x 2 140 21124.02 Replacement glasses 68 79 x 34 79 11068.01 79 95 x 34 95 11079.01 124 140 x 34 140 11124.01 L1 18 11079.00 ∅48 L2 Circular sightglasses These can be welded into vacuum vessels, pressure vessels or reservoirs. The PTFE gaskets are stable up to 250 °C. Suitable for vacuum and pressures up to 25 Bar. Width* Vessel size Nominal Cat. no. ∅ [mm] [ltr] width 38 1 upwards DN40 11038.00 48 2 upwards DN50 11048.00 * Other sizes on request 11048.00 ∅18x1.5 In-line sightglasses Suitable for rising and falling lines. For spares refer to vessel sightglasses of the same nominal width. Pipe size Sightglass Pressure Cat. no. ∅ [mm] [Bar] 18 x 1.5 DN22 32 20454.22 18 x 1.5 DN30 50 20454.20 25 x 2.0 DN30 50 20454.30 30 x 2.0 DN40 32 20454.40 42 x 2.0 DN50 32 20454.50 Locking ring for 20454.22 20455.34 For sightglass spares refer to pages 43 and 47. ∅22 20454.22 37
Page 1: Reaction vessels for pressure and v
Page 4 and 5: 54470 Bernkastel-Kues Deliveries Po
Page 6 and 7: Reaction vessels for vacuum Reactio
Page 8 and 9: Cylindrical-conical pressure vessel
Page 10 and 11: Reaction vessels for vacuum and pre
Page 26 and 27: 10 litre pressure vessel, rated at
Page 30 and 31: Custom and special purpose vessels
Page 32 and 33: Reactor system with lifting stage
Page 40 and 41: Accessories Drain valves and access
Page 42 and 43: Accessories Pressure gauges Item Ca
Page 44 and 45: Accessories Safety devices for vess
Page 46 and 47: Accessories Thermometers, thermomet
Page 48 and 49: Accessories Adaptors for ports in v
Page 50 and 51: Accessories Lid gaskets for vessels
Page 52 and 53: Lifting jacks for vessels Fixed lid
Page 54 and 55: Stirrer drives Stirrer drive with s
Page 56 and 57: Torque measurement Torque measureme
Page 58 and 59: Stirrerheads ‘O’ and oil film s
Page 60 and 61: Stirrerheads ’O’ ring sealed st
Page 62 and 63: Stirrerheads Mechanically sealed st
Page 64 and 65: Stirrerheads Mechanically sealed st
Page 66 and 67: Stirrerheads Magnetically coupled s
Page 68 and 69: Stirrerheads Magnetically coupled s
Page 70 and 71: Stirrers When ordering please menti
Page 72 and 73: Stirrers Helical stirrers and Dispe
Page 74 and 75: Stirrers Turbine stirrers and Count
Page 76 and 77: Conical joint stirrerheads Stirrerh
Page 78 and 79: Conical joint stirrerheads Stirrers
Page 80 and 81: Thermostats and accessories JUVO Th
Page 82 and 83: Thermostats and accessories Output
Page 84 and 85: Thermostats and accessories Accesso
Page 86 and 87: Thermostats and accessories Accesso
Page 88 and 89:
M18x1.5 Thermostats and accessories
Page 90 and 91:
Thermostats and accessories Consuma
Page 92 and 93:
Öltemp Reaktor T1 T2 Öltemp Reakt
Page 94 and 95:
T2 INT T1 EXT RESET START STOP PAUS
Page 96 and 97:
Fire suppression troughs Fire suppr
Page 98 and 99:
Transportable turnkey plant with:
Page 100 and 101:
Index A Adaptors conical joint, no
Page 102 and 103:
Conditions of sale and payment Cond
Page 104 and 105:
Reaction vessel, 50 litres, in stai
Page 106 and 107:
B53 Köln- Krefeld Köln A3 A1 Daun
show all

Vessels catalogue (complete) - Juchheim LaborgerÃ¤te GmbH

Create successful ePaper yourself

Delete template?

Save as template?