snom ONE Technical Manual - Atcom

8
Deploying the snom ONE IP Telephone System
Manual Software Upgrades
Manual upgrades can be done by replacing the pbxctrl.exe file. Before the upgrade, you might want to
make a backup of the working directory in the event you want to revert to the former software version.
1. Determine the version number of the current software by going to Admin > Status.
2. Navigate to the working directory and rename the pbxctrl.exe file so that it corresponds with the
old version number (e.g., pbxctrl-2.0.3.1713). Keep the file in the directory so that you can
later determine which software version is associated with which file. This step can be done while the
system is running.
3. Go to wiki.snom.com and download the new executable (click the Existing Installations Only
link).
4. Put the file into the snomONE working directory.
5. Rename the new file pbxctrl.exe.
6. Restart the system.
Restarting the System
Various system configurations require a system restart. You can do this by either restarting the computer or
restarting the system. When restarting the system, use one of the following methods.
Restarting From Windows (Service Control Manager)
1. Right-click My Computer.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299