snom ONE Technical Manual - Atcom

24
Deploying the snom ONE IP Telephone System
■ Default Web Language: This setting controls the language used on the web interface. The file that
influences this setting is lang.*.xml, where * represents a country (see Table 17-5 for a list of
country codes).
■ Time Zone: The Time Zone setting is used to set the local time zone. It influences the time that
appears on a user’s mailbox messages, the telephone display, and voicemail. The system is capable
of dealing with several time zones at once, making it possible for every user to select his or her own
time zone.
Administrator Login
The system administrator’s login must be protected at all times, so it is imperative that a high-security password
be used (see the Password Strength setting on page 25). The password is stored in a hashed format
and cannot be read from the global configuration file.
■ Username: This field sets the administrator’s user name. By default, the user name is admin, but it
can be changed to anything (we recommend changing it).
■ Password: This field sets the password for the user name from the previous setting. By default,
there is no password, but be sure to set one. The administrator’s password can be reset in the event
it gets lost (see instructions below).
Resetting the Admin Password if Lost
To reset a lost password, you will need to remove the existing password from the global configuration file
(from the pw_pass parameter) then enter a new one through the web interface. This can be done in Notepad.
Instructions are provided below:
1. From a text editor, open the root file (pbx.xml). The file path is shown below:
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299