Ondatherm 900 Installation Guide - PGA Consultants

Only if cutting list,
drawings have been
made by AMC
Only if installation is
supervised by AMC
Check list
Site
Tidy and clean
Y N
Delivery On time
Y N
Number of times
Packages properly storages
Y N
Material properly lifted from packet to site
Y N
On time
Y N
Delays
Y N
Roof
Fixation to the roof Y N
Are properly Junctions
Y N
done Ends
Y N
Gutters
Expansion joints
Y N
Are they Shavings
Y N
clean bubles
Y N
Are installed Joints
Y N
properly mouths
Y N
Aligment of the gutter and ridge
Y N
Undulations, scratchs, dents, material properly managed
Y N
Roof is lengh enough at the gutter
Y N
Overlaps of the roof are properly done
Y N
Fixations are enough and well positioned
Y N
Roof material properly fixed
Y N
Ridge properly installed
Y N
Ridge joints properly installed
Y N
End of the roof material is properly folded
Y N
Fixation of flashings properly done
Y N
Every solution is water proof
Y N
Holes revised and properly done
Y N
Protected film properly retired and storaged
Y N
Roof cleaned
Y N
Façade
Material properly lifted from packet to site
Y N
Material without bubles and undulations
Y N
Fixations are enough and well positioned
Y N
Drip and façade are properly leveled and aligned
Y N
Doors, Windows and holes properly done and flashings installed
Y N
Overlaps or vertical joints properly installed and sealed
Y N
Drip is properly aligned
Y N
Corners are properly aligned
Y N
Windows are properly aligned
Y N
Flashings properly designed
Y N
Flashings properly sealed and fixed
Y N
Drip flashing doesn't have any dent
Y N
Safety
Installers have finished the safety training
Y N
Safety speach has been done to the installers
Y N
Collective safety measures are installed
Access to the roof is safe
Y N
Electricity wires are at the right distance and properly insulated
Y N
Electrical box containers have a "gadget that cut the electricity if contact with metal" Y N
Installers have the right tools for the installation
Y N
Material packets are properly placed and/or fixed
Y N
Scaffolding and platforms are safe
Y N
The ground permits the movement of the platforms
Y N
The roof holes are protected aganist fallings
Y N
Working area is properly indicated
Y N
Installers have the individual safety elements
Y N
New installer in the work site has been trained in safety
Y N
Components installation
The insulation is properly installed according with the system description
Y N
The spacers are properly installed and fixed
Y N
Vapour barrier is installed properly
Y N
Are there thermal bridges visibles
Y N
I.2. Cutting list templates
ArcelorMittal Construction Page 17 of 21
Javier Cirauqui