ENGLISH Mini DV/S-VHS VIDEO CASSETTE RECORDER - Jvc.dk
ENGLISH Mini DV/S-VHS VIDEO CASSETTE RECORDER - Jvc.dk
ENGLISH Mini DV/S-VHS VIDEO CASSETTE RECORDER - Jvc.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10 EN INSTALLING YOUR NEW <strong>RECORDER</strong><br />
Basic Connections<br />
ANTENNA<br />
IN<br />
TV aerial cable<br />
RF cable<br />
(provided)<br />
AV1 (L-1)<br />
IN/OUT<br />
ANTENNA<br />
OUT<br />
21-pin SCART<br />
connector<br />
Aerial connector<br />
Back of TV<br />
21-pin SCART<br />
cable<br />
(provided)<br />
Mains outlet<br />
Mains power cord<br />
Back of recorder<br />
ATTENTION:<br />
Your TV must have a 21-pin AV input connector<br />
(SCART) for the connection to the recorder.<br />
It’s essential that your video recorder be properly<br />
connected.<br />
THESE STEPS MUST BE COMPLETED BEFORE ANY<br />
<strong>VIDEO</strong> OPERATION CAN BE PERFORMED.<br />
A<br />
Check the contents.<br />
Make sure the package contains all of the accessories<br />
listed in “SPECIFICATIONS” on page 88.<br />
B<br />
Situate the recorder.<br />
Place the recorder on a stable, horizontal surface.<br />
C<br />
Connect the recorder to TV.<br />
A Disconnect the TV aerial cable from the TV.<br />
B Connect the TV aerial cable to the ANTENNA IN<br />
connector on the rear panel of the recorder.<br />
C Connect the provided RF cable between the<br />
ANTENNA OUT connector on the rear panel of the<br />
recorder and the TV’s aerial connector.<br />
D Connect the provided 21-pin SCART cable between<br />
the AV1 (L-1) IN/OUT connector on the rear panel of<br />
the recorder and the TV’s 21-pin SCART connector.<br />
● The AV1 (L-1) IN/OUT connector accepts and delivers either a<br />
composite signal (regular video signal) or a Y/C signal (a signal<br />
in which the luminance and chrominance signals are<br />
separated). If your TV’s 21-pin AV input connector (SCART) is<br />
compatible with the Y/C signal, set “L-1 OUTPUT” to<br />
“S-<strong>VIDEO</strong>” after the connection and the initial settings are<br />
completed (� pg. 52). You can obtain high-quality S-<strong>VHS</strong><br />
pictures. (For connection, be sure to use a 21-pin SCART cable<br />
that is compatible with the Y/C signal.)<br />
● Set your TV to the <strong>VIDEO</strong> (or AV), Y/C, or RGB mode<br />
according to the type of your TV’s SCART connector.<br />
● For switching the TV’s mode, refer to the instruction manual of<br />
your television.<br />
● To obtain high-quality S-<strong>VHS</strong> pictures, you can also use the<br />
S-<strong>VIDEO</strong> connection described on page 11.<br />
D<br />
Connect the recorder to mains.<br />
Plug the end of the mains power cord into a mains outlet.<br />
After the connection is completed, perform “Auto Set<br />
Up” on page 12.
Change language