ENGLISH Mini DV/S-VHS VIDEO CASSETTE RECORDER - Jvc.dk

36 EN TIMER RECORDING
G-CODE/
SHOWVIEW Timer
Programming
With the SHOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
You can use the remote control with LCD panel to enter the
SHOWVIEW number.
Before performing the SHOWVIEW Timer
Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Turn on the TV and select the AV mode.
INFORMATION
G-CODE and SHOWVIEW are different trademarks used to
represent the same easy recording feature, but only the term
SHOWVIEW system will be used. If you use the G-CODE
system, follow the same instructions listed for the SHOWVIEW
system.
LCD panel
1
2
1
2
1 2 3
4 5 6
7 8 9
0
3
3
4
4
A
Press 1.
B
Turn on the recorder.
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
C
Select the deck.
Press VHS or DV.
D
Access the SHOWVIEW display.
Press LCD PROG.
The LCD panel looks like this:
E
Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of
a programme you wish to record.
● If you make a mistake, press & and input the correct number.
The SHOWVIEW number you enter appears on the LCD panel:
F
Transmit the SHOWVIEW number.
Press to transmit the SHOWVIEW number from the
remote control to the recorder.
● If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Input a
valid SHOWVIEW number.