MS-4424 Instruction Manual - Fire-Lite Alarms
MS-4424 Instruction Manual - Fire-Lite Alarms
MS-4424 Instruction Manual - Fire-Lite Alarms
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Installation Cabinet Mounting<br />
The figure below shows the exterior dimensions and mounting hole locations for the cabinet backbox and<br />
dimensions of the optional trim ring:<br />
14.625”<br />
(37.15cm)<br />
5.375”<br />
(13.65cm)<br />
16.125”<br />
(40.96cm)<br />
16.00”<br />
(40.64cm)<br />
<strong>MS</strong>44-cabdim.cdr<br />
4.75”<br />
(12.07cm)<br />
1.00”<br />
(2.54cm)<br />
1.00”<br />
(2.54cm)<br />
14.50”<br />
(36.83cm)<br />
12.50”<br />
(31.75cm)<br />
9.50”<br />
(24.13cm)<br />
1.5”<br />
(3.81cm)<br />
16.125”<br />
(40.96cm)<br />
14.625”<br />
(37.15cm)<br />
<strong>MS</strong>44-trimring.cdr<br />
Reinstallation of Circuit Board<br />
Reinstall the printed circuit board as follows:<br />
Figure 2 Cabinet Mounting Dimensions<br />
Step<br />
Action<br />
1 Position circuit board over stand-offs on backbox rail and secure with four<br />
(4) phillips screws. Tighten securely.<br />
2 Connect transformer wires to J1 connector on circuit board.<br />
16 <strong>MS</strong>-<strong>4424</strong> <strong>Instruction</strong> <strong>Manual</strong> PN 15153:G1 10/22/02