DAZ-TA Pro
DAZ-TA Pro
DAZ-TA Pro
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operating Instructions<br />
<strong>DAZ</strong>-<strong>TA</strong> <strong>Pro</strong><br />
3.4.1.2 Main menu: Memory: Print memory<br />
Activate the main menu as described at Point 3.0.0.0 and select the Memory menu<br />
option.<br />
Main menu:<br />
Tightening sequence<br />
Memory<br />
Tare angle<br />
# 2 0/13 n Not OK<br />
388.93 Nm 29.91°<br />
< 18.00 27.00<br />
> 22.00 33.00<br />
Message:<br />
Printing!<br />
Press the Print button while in this display to<br />
print the entire contents of the memory.<br />
3.5.0.0 Main menu: Angle zeroing<br />
Activate the main menu as described at Point 3.0.0.0 and select the Angle tare option,<br />
press the SET button to activate the angle zeroing function.<br />
Main menu:<br />
Memory<br />
Tare angle<br />
Angle stability<br />
Message:<br />
Tare angle<br />
If the wrench is not in the charging cradle, this option initiates a manual angle zeroing<br />
process.<br />
The wrench must not be moved at all during this zeroing action.<br />
The process takes approx. 60 s.<br />
Note: When the wrench is in place in the charging cradle, angle zeroing (<strong>TA</strong>RA) is automatically<br />
performed.<br />
INTERN 13:32<br />
R<br />
<strong>TA</strong>RA 0.00 Nm<br />
If the wrench is in its charging cradle, the<br />
angle zeroing process takes place<br />
automatically as a background process.<br />
The wrench is ready for use at any time.<br />
During this process, the setup menu is<br />
blocked.<br />
Change level: 02/07 Version<br />
8000.15.2<br />
Page: 26 / 56