DAZ-TA Pro
DAZ-TA Pro
DAZ-TA Pro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating Instructions<br />
<strong>DAZ</strong>-<strong>TA</strong> <strong>Pro</strong><br />
3.7.1.0 Main menu: Settings: Tool data<br />
Activate the settings menu as described at Point 3.7.0.0 and select the Tools menu<br />
option.<br />
SETTING MENU:<br />
Calibr.settings<br />
Tools<br />
ID Code<br />
Press the UP/DOWN selector keys to select the required tool presettings. Up to five<br />
different tools can be preset and press the SET button briefly to move from one<br />
parameter to the next: extension, bending, preangle, dynamic snug and angle rate.<br />
Tool ID(1)1<br />
Dynamic<br />
snug (FGP)<br />
Extension (25)<br />
Tightening time<br />
#1 FBD8258<br />
75% > 90°/s<br />
25.0 mm 0.011°/Nm<br />
30s<br />
Angle rate<br />
Bending<br />
3.7.1.1 Main menu: Settings: Tool data: Extension<br />
EXTENSION:<br />
25.0 mm<br />
Min: .0 Max: 200.0<br />
Here, the corresponding extension = tool length (L) is entered.<br />
With the <strong>DAZ</strong>-<strong>TA</strong> 9 x 12, the default length is 17.5 mm,<br />
With the <strong>DAZ</strong>-<strong>TA</strong> 14 x 18 and higher, the default length is 25.0 mm,<br />
L<br />
L [mm]<br />
<strong>DAZ</strong>-T(A) 50 17,5<br />
<strong>DAZ</strong>-T(A) 100 17,5<br />
<strong>DAZ</strong>-T(A) 250<br />
<strong>DAZ</strong>-T(A) 350<br />
<strong>DAZ</strong>-T(A) 500<br />
<strong>DAZ</strong>-T(A) 800<br />
25<br />
25<br />
25<br />
25<br />
Note: If the extension deviates, the calibration should be checked.<br />
Change level: 02/07 Version<br />
8000.15.2<br />
Page: 28 / 56