DAZ-TA Pro

More documents

Recommendations

Info

Operating Instructions DAZ-TA Pro 4. Power supply The torque wrench will run for 8 hours on 3 x 1.2V NiMH AA 2450 mAh rechargeable cells. When it is not in use, please replace the torque wrench in its charging cradle and ensure that it makes contact with the charger contacts. 0h Charge battery! 1....………10 2h Charge battery! 1...................10 If the wrench is switched off, this message will appear. The progress bar shows the current battery status (1-10). If the battery is completely drained, it will take approx. 30 min. until status 1 is attained. This charging process has completed and the progress bar shows status 10, while at the bottom left the total charging time in hours is displayed (2 hours). Change level: 02/07 Version 8000.15.2 Page: 46 / 56
Operating Instructions DAZ-TA Pro 4.1 Charging the battery If, during a measuring operation, the symbol "BAT" appears in the bottom right-hand corner of the display, BOLT1/MI# 1 17:39 R M0 0.00 Nm NEWSEQ BAT the torque wrench has to be recharged in the charging cradle. If the battery is completely flat, recharging will take approx. 10–12 hours. A normal charge will take approx. 1-2 hours. During the charging process (with the wrench switched off), the progress bar will be seen on the display. The charge control monitors the recharging process and switches off the charger when the battery is fully charged. If the wrench is in the charging cradle but switched on, the message "Tara" appears on the display. INTERN 13:32 R TARA 0.00 Nm If the wrench is in its charging cradle, the angle zeroing process takes place automatically as a background process. The wrench is ready for use at any time. During this process, the main menu is blocked. . IMPORTANT: Only use the cradle supplied with the wrench! 4.2 Changing the battery First, switch the wrench off by pressing the ON/OFF button for several seconds. To change the cells, remove the lid at the end of the handle and replace the 3 rechargeable batteries(Type: 1.2V NiMH AA 2450 mAh). Your measuring data, history, sequences, joints and time data will be retained for the duration of the battery change (approx. 10 min). Calibration and tool data are stored in such a way that they are retained irrespective of the power supply. . Important notes: - NEVER turn on the torque wrench without batteries in place as otherwise the stored data may be irretrievably lost = reset (sequences, joints, date and time) - Change level: 02/07 Version 8000.15.2 Page: 47 / 56
Page 1 and 2: Operating Instructions DAZ-TA Pro E
Page 3 and 4: Operating Instructions DAZ-TA Pro 3
Page 7 and 8: Operating Instructions DAZ-TA Pro N
Page 19 and 20: Operating Instructions DAZ-TA Pro E
Page 39 and 40: Operating Instructions DAZ-TA Pro N
Page 45: Operating Instructions DAZ-TA Pro X
Page 49 and 50: Operating Instructions DAZ-TA Pro I
Page 53 and 54: Operating Instructions DAZ-TA Pro C
Page 55 and 56: Operating Instructions DAZ-TA Pro S

DAZ-TA Pro

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?