FS4400 PCI Express State Analysis Probe User Manual - FuturePlus ...

Probe Manager
Application
The Probe Manager software can be found as the FS4400_probe_setup.exe file on the
CD provided in the Documentation package. Insert the CD into the computer that will be
used to control the FS4400 probe. This computer must have a USB connection. Using
Windows File Manager, select the FS4400_probe_setup.exe file and double-click it,
which initiates the installation software on the computer and places an icon on the
desktop. Follow the directions that follow including agreeing to the license terms, once
the software installation is complete click on finish. To start the program manager
simply double click its desktop icon.
The Probe Manager application detects all FS44xx probes that are connected to the
USB bus and allows the user to select which probe will be controlled by the current
instance of the Probe Manager application from the initial screen as seen below.
The initial screen is followed by the Protocol Selection screen, in which the user selects
the protocol the FS4400 probe will be associated with.
Once the protocol has been selected, the application displays the Main dialog as seen
below:
26