COLDLAM/HOTLAM TH 1100N/1600N/2000N Mounter ... - Neschen
COLDLAM/HOTLAM TH 1100N/1600N/2000N Mounter ... - Neschen
COLDLAM/HOTLAM TH 1100N/1600N/2000N Mounter ... - Neschen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1.3.3 On the machine<br />
On the machine you will find the following warning symbols<br />
(See Figure 1).<br />
HOT OBJECTS (1)<br />
DANGER OF GETTING BURN WOUNDS.<br />
MAKE SURE NOT TO TOUCH <strong>TH</strong>E UPPER<br />
MAIN ROLLER WHEN HEATED.<br />
When the heater option is installed (HotLam <strong>TH</strong>), this symbol<br />
is placed on the inside side panel on both sides of the<br />
machine, just above the upper main roller, visible from the<br />
front and rear side. And it is placed on the middle of the tie-bar<br />
located behind the roller.<br />
ROTATING PARTS (2)<br />
DANGER OF GETTING INJURED BY<br />
ROTATING PARTS.<br />
MAKE SURE <strong>TH</strong>AT <strong>TH</strong>ESE ROTATING PARTS<br />
DO NOT CATCH YOUR FINGERS, CLO<strong>TH</strong>ING,<br />
HAIR, ETC.<br />
This symbol is placed on the front side on both arms of the infeed<br />
table and on the rear side on the inside side panels just<br />
above and below the output table.<br />
ESD SHOCK (3)<br />
DANGER OF GETTING AN ELECTRIC SHOCK<br />
CAUSED BY ELECTROSTATIC CHARGE<br />
BUILD-UP IN <strong>TH</strong>IS AREA.<br />
This ESD symbol is placed in those places most likely to buildup<br />
electrostatic charges.<br />
Figure 1: Warning symbol positions.<br />
Warranty and Safety instructions 7<br />
English
Change language