Series 15i-A Maintenance Mnl, GFZ-63325EN/03 - Automation ...

1. SCREEN INDICATIONS AND OPERATIONS B–63325EN/03
1.1.4
Function Selection
Keys
To select a function with the corresponding soft key, press the function
menu key first to set soft keys to a function selection key state, and then
press the desired function selection key.
Function selection is allowed in any mode.
Use a chapter selection key to specify detailed function selection.
The following function selection keys are provided.
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Function selection key
No.
Function key
(MDI panel)
Function selection
key (soft key)
Description
(1)
POS
POSITION
Selects a current–position information
screen, including absolute coordinates, machine
coordinates, relative coordinates, and
a remaining movement distance.
(2)
PROG
PROGRAM
Selects a part program screen or a program
check screen.
(3)
OFFSET
SETTING
OFFSETSETING
Selects a tool offset screen or a workpiece
origin offset screen.
(4)
SYSTEM
SYSTEM
Selects a parameter screen, a diagnosis
screen, or a PMC screen.
(5)
MESSAGE
MESSAGE
Selects a screen for alarm messages and
operator messages.
(6)
GRAPH
GRAPHIC
Selects a graphic screen.
4