Series 15i-A Maintenance Mnl, GFZ-63325EN/03 - Automation ...

1. SCREEN INDICATIONS AND OPERATIONS B–63325EN/03
1.1.5.4
System
Function key on the MDI panel
Soft keys
SYS-
TEM
SYS-
TEM
CHAP-
TER
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
(11) (12) (13) (14) (15) (16) (17) (18) (19)
(21) (22) (23) (24) (25) (26) (27) (28) (29)
No. Chapter menu Description
(1) PARAMETER Selects a screen for setting a parameter.
(2) PITCH ERROR Selects a screen for setting pitch error compensation.
(3) DIAGNOSIS Selects a screen for showing information indicating a CNC
state.
(4) DI/DO MONITOR Selects a screen for showing status information of signal.
(5) PERIODMAINTE Selects a screen for setting a maintenance item to be periodically
controlled.
(6) MAINTEINFO Selects a screen for setting information in maintenance.
(7) SYSTEMCONFIG Selects a screen for showing the current system state.
(8) PMC Selects a screen related to PMC.
(11) WAVE DIAGNS Selects a screen for showing data, such as a servo position
error, torque, and a machine signal, in a graph.
(12) SERVO Selects a screen for performing servo setting.
(13) SPINDLE Selects a screen for performing spindle setting.
(14) HPCC Selects a screen for performing a setting related to high–
precision contour control.
(17) FSSB Selects a screen for performing a setting related to a high–
speed serial bus (FSSB: Fanuc serial servo bus).
(18) VOLUMETRIC Selects a screen for setting three–dimensional error compensation.
(19) DISPLYMEMORY Selects a screen for showing the contents of the current
CNC memory.
(23) ETHERNET Selects a screen for maintenance and setting of the Ethernet
board.
(24) DATA SERVER Selects the screen for Data server maintenance and setting.
(25) ALARM HISTRY Selects a screen for showing the contents of a previously
generated alarm.
(26) OPERAT HISTORY Selects a screen for showing operation history.
(27) SYSTEMLOG Selects a screen for showing the contents of a previously
generated system alarm.
(28) TOUCH PANEL Selects a screen for setting a touch panel.
8