Series 15i-A Maintenance Mnl, GFZ-63325EN/03 - Automation ...

1. SCREEN INDICATIONS AND OPERATIONS B–63325EN/03
1.2
SCREEN
INDICATIONS AT
POWER ON
The test results of hardware (RAM and ROM), and the check results of
control software and file data are indicated on the screen at power on.
FANUC SERIES 15I F010A
COPYRIGHT(C) FANUC LTD 1997–1999
RAM TEST : END
ROM TEST : END
PMC ROM TEST : END
SERVO RAM TEST : END
SERVO ROM TEST : END
LOAD SYSTEM LABEL : END
CHECK SYSTEM LABEL : END
LOAD FILES : END
LOAD MESSAGE DATA : END
Series and edition of
CNC control software
Copyright indication
Test results of RAM and
ROM mounted on CNC,
PMC, and digital servo
system
Verification result of
compatibility of CNC
control software
Loading results of
backup file data such as
NC parameters, and
language data
CAUTION
If a hardware error is detected in the RAM and ROM tests
for the CNC, PMC, and digital servo system, power–on
processing is stopped.
10