Download Lab Safety Manual - Integrated Nanosystems Research ...

“ Solvent” Wet Bench
Solvent benches are designated to perform processes that deal with flammable
material. These benches are equipped with deep wells with temperature control hot
plates and rinse sink with DI water and Nitrogen blow off guns. No materials should
be poured down the drain. All waste material must be collected.
“Standard” fume Hood
Standard fume hoods are the only hoods not equipped with laminar flow capability.
These benches are used for standard chemistry such as setting up electroplating stations.
They are not equipped with Nitrogen blow off guns or rinse stations. Upon finishing
work clean up station and safely store any materials that were used.
74