Operating instructions TV - Loewe

Picture in Picture
Picture in Picture (PIP)
The concurrent display of two different images is referred to as Picture
in Picture.
➠ The coloured buttons do not work as described below for TV sets with
MHEG-5 software, but they operate as described on page 33 (Digital
Teletext).
➠ A concurrent representation of two HDTV signals is not possible.
➠ A concurrent representation of two coded stations is not possible.
➠ Picture change and station selection is restricted during recording.
Swap contents of PIP and main picture
Select the PIP picture
➠ The frame is green,
if not, press the green button.
Yellow button: Swaps contents of TV picture and PIP picture.
➠ The frame is green,
if not, press the green button.
Select the station as usual.
Your TV set distinguishes between two PIP displays:
Split screen In this case the screen is divided in the middle and the additonal
PIP image is shown on the right side of the screen.
Both images are compressed horizontally and each gets
half of the screen.
Small PIP In this case a small PIP image is inserted in the TV picture.
The PIP operation distinguishes between two functionalities:
Standard PIP Stations freely selectable and changeable for PIP and TV
picture (coloured buttons have PIP-specific meaning, see
below).
iPIP The TV picture is moved to the PIP picture when you press
the PIP button. The station of the TV picture is now freely
selectable. When you press the PIP button again, the PIP picture
returns to the TV picture and the PIP window closes.
2 ZDF
17.00 - 18.30 Flora & Fauna
Select the station for the main picture
➠ The frame is white,
if not, press the green button.
Select the station as usual.
Start and end Picture in Picture mode
- 28
Show/hide PIP.
Standard PIP operation:
PIP as freeze picture
In the Standard PIP function a green frame indicates that the
station selection acts on the PIP picture. A white frame means
that the operation refers to the main picture. If the frame is
blue, the station scan is active in the PIP picture. If the iPIP
function is activated, this is indicated by an orange frame.
➠ For TV sets with MHEG-5 Software, you switch from
the green bar/frame to the white by using the PIP key.
The next time you press the PIP key, PIP is switched off.
➠ The frame is green,
if not, press the green button.
Red button: Freeze picture in PIP on / off.
1 ARD
17.30 - 20.00 Toskana
Scan station in the PIP
➠ The frame is green,
if not, press the green button.
Blue button: Start Scan stations.
The frame turns blue,
the stations now change automatically.
Blue button: Stop Scan stations.
The frame is green again.