READ THIS MANUAL CAREFULLY! - Mojo Motorcycles
READ THIS MANUAL CAREFULLY! - Mojo Motorcycles
READ THIS MANUAL CAREFULLY! - Mojo Motorcycles
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A diagnostic tachometer must be used for this procedure.<br />
1. Start the engine and warm it up for a few minutes at approximately 1,000 to 2,000r/min. Occasionally rev the<br />
engine to 4,000 to 5,000 r/min. The engine is warm when it<br />
quickly responds to the throttle.<br />
2. Remove panel.<br />
3. Connect the tachometer to the spark plug lead, and then set<br />
the idle to the specified idling speed by adjusting the throttle<br />
stop screw. Turn the screw in direction a to increase the<br />
engine speed, and in direction b to decrease the engine<br />
speed.<br />
4. Install the panel.<br />
Specified idle speed:1,200<br />
1,400 r/min<br />
The correct valve clearance changes with use, resulting in improper fuel/air supply or engine noise. To prevent<br />
this, the valve clearance must be adjusted regularly. This adjustment however, should be left to a professional<br />
service technician.