READ THIS MANUAL CAREFULLY! - Mojo Motorcycles

Keeping your ATV clean will not only improve its appearance but it can also extend the life of various
components. With a few precautions, your ATV can be cleaned much like an automobile.
The best and safest way to clean your ATV is with a garden hose and a pail of mild soap and water. Use a
professional type washing mitten, cleaning the upper body first and the lower parts last. Rinse with water
frequently and dry with a chamois to prevent water spots.
If warning and safety labels are damaged, contact your dealer for replacement.
Your ATV does not recommend the use of a high pressure type car wash system for washing the ATV. If a high
pressure system is used, exercise extreme care to avoid water damage to the wheel bearings, transmission seals,
body panels, brakes and warning labels.
Grease all zerk fittings immediately after washing, and allow the vehicle to run for a while to
evaporate any water that may have entered the engine or exhaust system.
Your ATV can be waxed with any non-abrasive automotive paste wax. Avoid the use of harsh cleaners since
they can scratch the body finish.
Certain products, including insect repellants and chemicals, will damage plastic surfaces. Use caution when
using these products near plastic surfaces.