READ THIS MANUAL CAREFULLY! - Mojo Motorcycles

3. Open the throttle lever gradually.
Shifting: Neutral to Reverse and Reverse to Park
The gear selector cannot be shifted into reverse (R) or
park(P) without applying the rear brake.
1. Bring the machine to a complete stop and return the
throttle lever to the closed position.
2. Apply the rear brake pedal.
3. Shift from neutral to reverse or from reverse to park and
vise versa by moving the gear selector along the shift guide.
When in reverse, the reverse indicator light should be on. If the light does not come on, ask your dealer to
inspect the reverse indicator light electrical circuit.
Due to the synchronizing mechanism in the engine, the light may not come on until the ATV starts moving.
4. Check behind for people or obstacles, then release the rear brake pedal.
5. Open the throttle lever gradually and continue to watch rear while moving backward.
When you shift into reverse, make sure there are no obstacles or people behind you. When it is safe to
proceed, go slowly.