19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

More documents

Recommendations

Info

Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.com19Hand ToolsHand Tools• Single-hand Chain Latching. The Model HC300 features a springloadedchain that saves time and significantly aids set up and operation.• Ergonomic Design. With all controls at the operator’s fingertips, the toolhas been designed for maximum productivity.• High Speed. With a powerful 1.2HP, 11 amp motor, the Model HC300delivers 360 RPM to quickly bore holes while optimizing hole saw life.• Horizontal and vertical flats to ensure perpendicular cutting.Specifications:Motor: Universal, 110V or 230V 25-60Hz 11 amp, 1.2 HP, UL/CSA listed.RMP: 360 (no load)Hole Cutting Capacity: up to 3"Chuck Size: 1/16" – 1/2"Pipe Diameter Mounting Range: 1-1/2" – 8"Weight: 31 lbs.Height: 12.8"Length: 11.9"Width: 13.2"Standard Equipment:One (1) Hole Cutting Tool (Base and Motor Assembly)One (1) Chuck KeyAccessories:• Hole Saws• R300 Solid Shank Arbor• Carrying CaseCat. No. Model No. Description Wt. (lbs)76777 HC-300 3" Hole Cutting Tool 115V 3176787 HC-300 3" Hole Cutting Tool 230V 3176792 HC-300-J 3" Hole Cutting Tool 100V 3116671 R2S Solid Shank Arbor 3/484472 – HC-450/HC-300 Carrying Case 1977017 – Chuck Key 1/4Note: The HC-300 is not a hot tapping tool.Use the R300 Arbor when drilling 1-1/4" and larger holes.Hole Cutting Tool/Model HC450The RIDGID Model HC450 isengineered for continuous 1/4"to 4-3/4" hole cutting in andup to 8" diameter steelunpressurized pipe. Thebuilt-in level ensures lineup for multiple holes whenbranching lines using Mechanical T,Vic-O-Let fittings or welded saddles.Dual-side feed handles and switchesprovide easier operation from anyangle. In addition, the HC450’sheavy-duty chuck accommodates 1/8"to 5/8" arbors. The HC450 is ideal formechanical, industrial maintenanceand fire protection contractors since it cuts holes into a wide variety of pipematerials. No off-the-shelf drill-based hole cutter compares in performanceor durability to the rugged purposed-built Model 450.• 13 amp 1.2 HP worm-gear driven motor delivers unmatched hole cuttingpower for schedule 10, 40 and 80 pipe.• Engineered for 1/4" to 4-3/4" continuous dry or oiled hole cutting.• Quickly mounts onto 1-1/4" to 8" diameter pipe.• RPM maximizes holesaw life and does not spray lubricant or chips.• Only 11-1/2" high for low clearance jobs.• Dual-side controls provide easy operation.• GFCI and a built-in breaker for operator protection.• Chuck accommodates 1/8" to 5/8" arbors.• Two carrying handles ease mounting and alignment.• Built-in level for multiple hole alignment.Specifications:Motor: Universal, 115V or 220V 25-60Hz 13 amp, 1.2 HP, UL/CSA listedRPM: 110 (no load)RidgidHole Cutting Tool/Model HC450 (continued)Hole Cutting Capacity: up to 4-3/4"Chuck Size: 5/8"Pipe Diameter Mounting Range: 1-1/4" to 8"Weight: 42 Lbs.Height: 11-1/2"Length: 17"Width: 17"Standard Equipment:One (1) Hole Cutting ToolOne (1) 5/8" Arbor only for Hole SawsOne (1) Chuck KeyCat No Model No Description Weight (lb)57592 HC450 4-3/4" Hole Cutting Tool 110V, 50/60 Hhz 4257597 HC450 4-3/4" Hole Cutting Tool 220V, 50/60 Hhz 4257602 HC450-J 4 3/4" Hole Cutting Tool – Japan 100V, 50/60 Hhz 42Accessories84427 – HC450 Carry Case 1959502 R4 5/8" Arbor only for Hole Saws 1/459132 – Chuck Key 1/4Note: The HC450 is not a hot tapping tool.Mini Tapping Tool/Model RT1000The Model RT1000 Mini Tapping Tool is ideal for branching pressurizedwater lines. With 1" tapping capacity and the ability to drill into most pipematerials, the lightweight compact and corrosion-resistant design of theRT1000 is the perfect tool for branching pressurized pipe when systemshut down is out of the question.Features• Compact and lightweight, thetool is great for tight quartersand awkward locations.• Sturdy machined construction and corrosion-resistant materials combineto provide dependable lifelong operation.• Independent cutter feed mechanism gives the operator fullcontrol of drilling to optimize cutter performance and service life.• Taps steel, cast iron, ductile iron and plastic pipe.• Coupon retaining bits give you the confidence that the couponwill not be dropped in the pipe, preventing medium contaminationor possible damage of downstream equipment.Specifications:Tapping Capacity: 3/4 - 1"Mounting: Saddle, Welded Nipple, Weld-o-let, Thread-o-letActivation: Hand Ratchet, Air Ratchet, Right angle DrillCutter Feed: Rotation of sleeve around an acme threaded barrelPressure: Water, 150 psig @ 100°FSteam, Air - 100 psig @ 370°FStandard Equipment:Model RT1000 Mini Tap Tool• RT1000 Tapping Tool Only.• 3/4", 1" CTS Corporation Adapter.• Small Shaft Extension.• Small Saw Arbor.• 1/4" Pilot Bit.• Ratchet Wrench.• (2) Spud Wrenches.• Tool Box.Note: Cutters are not included. Note: The RT1000 uses the same drillsand hole saws as the RT3422 and the MLT3401 saddle tapping tool.The RT1000’s maximum capacity is 1".– continues –– continues –19-134WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comMini Tapping Tool/Model RT1000 (continued)Cat. No. Model No. Description Wt. (lbs)83567 RT1000 RT1000 Tapping Tool CTS Set 1683302 RT1000 RT1000 Tapping Tool Only 683307 – RT 1000 Tool Box 776022 – Ratchet Wrench 283317 – 3/4" CTS Adapter 0.383322 – 1" CTS Adapter 0.383337 – 3/4" NPTM Adapter 0.383342 – 1" NPTF Adapter 0.383347 – 1" NPTM Adapter 0.383327 – 3/4" Mueller 110 Compression Adapter 0.383572 – 1" Mueller 110 Compression Adapter 0.3CuttersHole Saws Model No. DIA (in) Type52760 M16 5/8 Bi-Metal52780 M24 7/8 Bi-Metal76267 – 5/8 Steel Shell76272 – 7/8 Steel Shell76292 – 5/8 CI-DI Bit76297 – 7/8 CI-DI Bit76317 – 5/8 Plastic Shell76322 – 7/8 Plastic ShellTapping Tool/Model RT3422The Model RT3422 is designed for branching pressurized water, steamand natural gas mains. With up to 2" capacity, corrosion-proof design,ability to handle most types of material, and lightweight, the ModelRT3422 is the tool to meet your tapping needs.Features• Easy to use. At only 21", thislightweight and compact toolis great for tight quartersand awkward locations.• Heavy-Duty Design. Sturdy machined, corrosion-resistant materialsfor dependable lifelong benefits.• Built-in bleed valve. Allows for easy purge of chips.• Independent cutter feed gives the operator total independent controlof the cutter feed rotation for optimal saw life.• Taps a variety of materials. The RT3422 is capable of tapping into steel,cast iron, ductile iron and plastic pipe.• Versatility. The RT3422 is capable of tapping mains of:– Water up to 500 psig.– Steam, air and natural gas up to 150 psig.• Coupon retaining bits. Exclusive pilot bits give you the confidence that thecoupon will not be dropped in the pipe, preventing medium contaminationor possible damage of downstream equipment.SpecificationsTapping Capacity: 3/4 – 2"Mounting: Saddle, Welded Nipple, Weld-o-let, Thread-o-letCutter Travel: 14"Activation: Hand Ratchet, Air Ratchet, Right angle DrillCutter Field: Rotation of sleeve around an acme threaded barrelPressure: Water, 500 psig @ 100°FSteam, Air and Natural Gas - 150 psig @ 370°F.Cat. No. Model No. DescriptionWt. (lbs)75982 RT3422 Tapping Machine Only 1875992 RT3422 3/4" – 2" NPT Set (male) 3091192 RT3422 3/4" – 2" CTS Set (flared) 30The RT3422 sets include RT3422 tapping tool with bleed valve, shaft extensions, heavydutyhole saw arbors, 1/4" and 3/8" coupon retaining pilot bits, ratchet wrench, (2) spud wrenches,and 5 valve adapters in a steel tool box. Cutters are available separately.CuttersHole Saws Model No Dia. (in) Type Hole Saws Model No Dia. (in) Type52760 M16 5/8 Bi-Metal 76292 – 5/8 CI/DI Bit52780 M24 7/8 Bi-Metal 76297 – 7/8 CI/DI Bit52800 M29 1-1/8 Bi-Metal 76302 – 1-1/8 CI/DI Shell52820 M35 1-3/8 Bi-Metal 76307 – 1-3/8 CI/DI Shell52850 M44 1-3/4 Bi-Metal 76312 – 1-3/4 CI/DI Shell76267 – 5/8 Steel Shell 76317 – 5/8 Plastic Shell76272 – 7/8 Steel Shell 76322 – 7/8 Plastic Shell76277 – 1-1/8 Steel Shell 76327 – 1-1/8 Plastic Shell76282 – 1-3/8 Steel Shell 76332 – 1-3/8 Plastic Shell76287 – 1-3/4 Steel Shell 76337 – 1-3/4 Plastic ShellRidgidWWW.HANESSUPPLY.COMTapping Tool/Model RT3422 (continued)AccessoriesCat. No. Description76017 Tool Box76022 11/16" Ratchet WrenchPilots76027 Coupon Retaining 1/4" Pilot76032 Coupon Retaining 3/8" PilotHole Saw Arbors76037 Small Hole Saw Arbor 5/8" – 1-3/16" Hole Saws76042 Large Hole Saw Arbor Asm. 1-5/16" – 1-3/4" Hole SawsShaft Extensions76047 Small Shaft Extension 5/8" – 1-3/16" Hole Saws76052 Large Shaft Extension 1-5/16" – 1-3/4" Hole SawsValve Adapters76057 CTS 3/4" Female76067 CTS 1" Female76072 CTS 1-1/4" Female76077 CTS 1-1/2" Female76082 CTS 2" Female83997 3/4" Mueller TM 11084002 1" Mueller TM 11084007 1-1/2" Mueller TM 11084012 2" Mueller TM 11076132 NPT 3/4" Male76137 NPT 1" Male76142 NPT 1-1/4" Male76147 NPT 1-1/2" Male76152 NPT 2" Male*NPT Sets available only with steel, male valve adapters.Mueller TM is a registered Trade Mark of Grinnell.TUBING TOOLSClose Quarters Tubing CuttersNos. 101, 103, 104, 117 and 118Features:• Specifically designed for use in restrictedspaces on small diameter, hard and soft copper,aluminum, brass and plastic tubing; rollers includegrooves for close-to-flare cuts.• Strong, lightweight slide and wheel housing, largeknurled feed screw knob gives easy control ofcutting pressure for clean cuts.• Models 117 and 118 include a self-feeding cutter wheelthat automatically cuts after tightening the knob only once.• The Model 117 features a special knob for easier tighteningof the feedscrewHand ToolsCatNoModelNoDescriptionStdWheelCapacity(in)Weight(lb)40617 101 Close Quarters Cutter E-3469 1/4 - 1-1/8 1/232975 103 Close Quarters Cutter E-3469 1/8 - 5/8 1/332985 104 Close Quarters Cutter E-3469 3/16 - 15/16 1/397787 117 Close Quarters Quick-Feed Cutter E-3469 3/16 - 15/16 1/386127 118 Close Quarters Quick-Feed Cutter E-3469 1/4 - 1-1/8 5/832573 118 Close Quarters Quick-Feed Cutter E-3469 1/4 - 1-1/8 1/16with Ratchet Handle32573 118 Ratchet Handle for 118 CloseQuarters Quick-Feed Cutter– – 5/810119-13519Hand Tools
Page 3 and 4: Complete Contractor and Industrial
Page 9: Complete Contractor and Industrial
Page 19 and 20: AccessoriesComplete Contractor and
Page 39 and 40: Retractable Utility Knife• Interl
Page 47 and 48: ForksComplete Contractor and Indust
Page 61 and 62:
Complete Contractor and Industrial
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
show all

19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

Create successful ePaper yourself

Delete template?

Save as template?