19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

Hand ToolsComplete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.com19Hand ToolsConstant Swing Cutters - Nos. 150• Telescoping feed screw design keepsthe cutter at the same length regardlessof tubing diameter – good for tight spaces.• Features an enclosed feed screw toeliminate clogging and jamming, groovedrollers for close-to-flare cuts,and a fold-away reamer.• Now includes X-CEL ® knob and X-CEL Pinfor quicker cutting and wheel replacement.• Made from high-strength zinc alloy.• Spare cutter wheel included in the knob.• Cuts copper, brass, and aluminum tubing and thin-wall conduit.Cat. Model Std. Cap. Wt.No. No. Description Wheel (in) (lbs)31622 150 Constant Swing Cutter E-3469 1/8 – 1-1/8 131627 150 Above w/H-D Wheel(s) E-4546 1/8 – 1-1/8 166737 150-L Constant Swing Cutter E-3469 1/4 – 1-3/8 166742 150-LS Above w/H-D Wheel(s) E-4546 1/4 – 1-3/8 1-1/8Enclosed Feed Cutters - Nos. 250• Cuts copper, brass and aluminumtubing and thin-wall conduit.• Both Enclosed Feed Cutters havea quick-acting mechanism for fastersize adjustments.• Spare cutter wheel.Cat. Model Std. Cap. Wt.No. No. Description Wheel (in) (lbs)33055 205 Ratcheting Encl. Feed Cutter E-3469 1/4 - 2-3/8 233070 205 Above w/H-D Wheel(s) E-4546 1/4 - 2-3/8 2Tubing and Conduit Cutters• Clean, square cuts are easily made on copper, brass, aluminumand thin-wall conduit.• Now includes X-CEL® Knob for quicker cutting.• Nos. 10, 15 and 20 feature a convenient fold-away reamer.• No. 30 is rated for larger diameter steel and stainless steel tubing.• No. 65S and 35S are especially designed for stainless steel tubing.Includes six individual bearings and cutter wheel to make stainlesscutting easier.15Cat. Model Std. Cap. Wt.No. No. Description Wheel (in) (lbs)32910 10 Tubing and Conduit Cutter F-158 1/8 - 1 7/832915 10 Above w/H-D Wheel E-1240 1/8 - 1 7/832920 15 Tubing and Conduit Cutter F-158 3/16 - 1-1/8 1-1/232925 15 Above w/H-D Wheel E-1240 3/16 - 1-1/8 1-1/232930 20 Tubing and Conduit Cutter 5/8 - 2-1/8 1-3/432935 20 Above w/H-D Wheel 5/8 - 2-1/8 1-3/432940 30 Tubing and Conduit Cutter E-2558 1 - 3-1/8 3-1/232950 30 Above w/H-D Wheel E-2191 1 - 3-1/8 3-1/297212 15-SI Tubing and Conduit Cutter E-1525 3/16 - 1-1/8 1-1/229963 35 S Stainless Steel Cutter E-635 1/4 - 1-3/8 131803 65S Stainless Steel Quick-Acting Cutter E-635 1/4 - 2-5/8 1-1/265S35SQuick Acting Tubing Cutters• Models 151-156 feature a quick-acting design,I-beam construction, hardened wear surfacesand thrust bearing slide assemblies forsmooth operation.• All Models now include an X-CEL ® Knoband X-CEL Pin for quicker cuttingand wheel replacement.• These cutters are available in modelsfor plastic pipe or metallic tubing.• Models 151 and 152 feature fold-awayreamers.Cat. Model Std. Cap. Wt.No. No. Description Wheel (in) (lbs)31632 151 Quick-Acting Cutter E-3469 1/4 – 1-5/8 1-1/431637 151-P Above w/Wheel for Plastic E-2155 1/8 – 1-1/4* 1-1/431642 152 Quick-Acting Cutter E-3469 1/4 – 2-5/8 231647 152-P Above w/Wheel for Plastic E-2155 1/4 – 2* 234572 152-P Above w/Wheel for PVC E-5272 1/4 – 2* 236597 153 Quick-Acting Cutter E-3469 1-1/4 – 3-1/2 236592 153-P Above w/Wheel for Plastic E-2155 1 – 3* 231652 154 Quick-Acting Cutter E-2558 1-7/8 – 4-1/2 3-7/831657 154-P Above w/Wheel for Plastic E-2156 1-1/2 – 4* 3-7/831662 156 Quick-Acting Cutter E-2558 4 – 6-5/8 531667 156-P Above w/Wheel for Plastic E-2157 4 – 6* 5* Nominal Plastic Pipe Size.Quick-Acting CSST Cutter• Cuts corrugated gas tubing sizes3/8" - 1" diameter.• Two sets of split-floating guide wheels*,located on the top and along the sidesof the cutter wheel, ride in thecorrugations to provide stabletracking, resulting in a high quality cut.• The floating guide rollers also serve to hold the two piecesof pipe together to ensure a complete and clean cut.• Ergonomic knob provides a firmer grip to cut through tubing quickly.• Quick acting mechanism allowing the cutter to rapidly adjustfrom 3/8" - 1" diameter tubing.• Durable I-beam style frame.Cat. Model Std. Cap. Wt.No. No. Description Wheel (in) (lbs)32078 151CSST Quick-Acting CSST Cutter E-3469 3/8 - 1 1.1Internal Tubing Cutters• For trimming tubing below floor level forshower/floor drain installations, or abovethe ceiling for sprinkler head installations.• Model 106 features a tool steel and aluminumbody while 108 and 109(P) have cast iron108bodies.• Each model features hardened steel rollersand cutter wheels.• Model 109P is equipped to cut PVCor ABS plastic.• Model 102 internal cutter features reamer type end for ease of entryinto distorted or burred tubing, and will cut lengths from 5/16"- 4-1/2".Cat. Model Std. Cap. Wt.No. No. Description Wheel (in) (lbs)33005 106 Internal Cutter E-2558 2-3 Nominal1/4 – 2-5/8 Depth 2-3/883240 108 Internal Cutter E-2558 1-1/4 – 2 Nominal1/4 – 1-3/4 Depth 283290 109 2-Handle E-2558 2-1/2 – 4 NominalInternal Cutter 1/4 – 2-1/8 Depth 483295 109-P Above w/Wheel E-5299 2-1/4 – 4 Nominalfor Plastic 1/4 – 2-1/8 Depth 415119-136WWW.HANESSUPPLY.COM