<strong>19</strong><strong>Hand</strong> <strong>Tools</strong><strong>Hand</strong> <strong>Tools</strong>SeekTech SR-60Choose the SR-60 locator for fast confident locateseven under tough locate conditions (poor conductors,poor soil conditions, poor grounding, etc.)Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since <strong>19</strong>30Visit us online at www.hanessupply.com• Can trace any frequency from 10 Hz to 490,000 Hz.• Can trace energized lines and sondes (beacons)simultaneously.• Has all the ease of use and accuracy of theSR-20 but with ALL locatable frequencies.SpecificationsActive Line Trace Frequencies**: 128Hz, 1kHz,8kHz, 33kHz, 51kHz, 93kHz, 200kHz, 262kHzPassive Power Trace: 50Hz, 60Hz,
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since <strong>19</strong>30Visit us online at www.hanessupply.comNaviTrack II Locator (continued)SpecificationsWeight: 5 lbs.Power Source: 4 C-Cell batteries.Battery Life: Approximately 16 hours.Standard FrequenciesSonde: 512 Hz.Active Line Trace: 128 Hz, 1 kHZ, 8 kHz, 33 kHz, 262 kHz.Passive AC Line Trace: 60 Hz, 50 Hz.Additional FrequenciesSonde: 16 Hz, 640 Hz, 850 Hz, 8 kHz, 16 kHz, 33 kHz.Active Line Trace: 65 kHz, 200 kHz.Cat No Description Weight (lb)96967 NaviTrack II Locator 522388 NaviTrack II Carrying Case 9<strong>125</strong>43 Marker Chips and Clip –NaviTrack ® Scout ®Scout is designed to solve the most demandingremote transmitter (sonde) locates using the samemulti-directional locating technology as thefull-featured NaviTrack II.Easier LocatesThe Scout's multi-directional antenna technologysees the entire signal all of the time. Simplymaximize the signal strength and you have foundthe target. No nulls or false peaks to complicatethe locate.AccuracyScout verifies the locate position using amicro-mapping display to mark distinctive poles infront of and behind the target, insuring an accurate locate.Automatic DepthDepth is automatically calculated and displayed when over the target.The Scout is ideal for users locating SeeSnake cameras and othersondes who occasionally need to locate energized lines.SpecificationsWeight: 3 lbs.Power Source: 4 C-Cell batteries.Battery Life: Approximately 24 hours.Standard FrequenciesSonde: 512 Hz, 640 Hz, 874 Hz, 16 kHz and 33 kHz.Line Trace: 128 Hz, 1 kHz, 8 kHz and 33 kHz.Passive AC Line Trace: 60 Hz, 50 Hz.Cat No Description Weight (lb)<strong>19</strong>238 NaviTrack Scout Locator 320248 Scout Carrying Case 6-1/4<strong>125</strong>43 Marker Chips and Clip –NaviTrack ® Line Transmitter - 10 WattFor tracing buried cable, TV lines, phone lines and othermetallic lines which can carry an electromagnetic signal.• Fully variable 10 watts of power output.• Two 25' coil connectors.• Conductive ground rod.• Inductive signal clamp(optional accessory).Specifications128 Hz, 1 kHz, 8 Hz, 33 kHz – 10 Watt200 kHz, 262 kHz – 1 Watt output power.Power Source: 8 D-Cell Batteries.Battery Life: Greater than 120 hours.Cat No Description Weight (lb)14818 NaviTrack Line Transmitter 920503 Inductive Signal Clamp 2Ridgid<strong>Hand</strong> <strong>Tools</strong>NaviTrack ® Brick - 5 Watt• For tracing buried cable, TV lines, phone lines and other metallic lineswhich can carry an electromagnetic signal.• Fully variable 5 watts of power output.• Lightweight, easy to carry.• Conductive ground rod.• Two 10' connectors.Specifications• 1 kHz, 8 Hz, 33 kHz, 262 kHz.• Power Source: Six C-Cell Batteries.• Battery Life: Greater than 120 hours.Cat No Description Weight (lb)20168 NaviTrack Brick Transmitter 2-1/2Inductive Signal Clamp• The RIDGID Inductive clamp allows usersto apply a signal to a cable or pipe whenconnecting directly to the target conductoris not possible.• The clamp couples the transmitting signalonto the conductor which then allowsusers to locate using a compatiblereceiver, such as the NaviTrack or NaviTrack Scout.• Two built in LED’s inform the user the clamp is functioning properly.• An integrated adapter allows users to attach a hotstickfor out of reach lines.• Compatible with both the NaviTrack 10 Watt Transmitterand the NaviTrack Brick Transmitter.Cat No Description Weight (lb)20503 Inductive Signal Clamp 2Inductive Signal Clamp• Can be attached to a drain cleaningcable or a water jet hose to locatethe Remote Transmitter in a line.• Flashing LED indicates that sondeis transmitting.Cat No Description16728 Remote Transmitter, 512 – AAA<strong>19</strong>263 Adapter for 5/8” & ¾”Drum Machine Cables<strong>19</strong>268 Adapter for 7/8” Sec. & 1/2” Drum Machine<strong>19</strong>273 Adapter for 5/8” Sec. & 3/8” Drum Machine<strong>19</strong>258 Adapter for 1 1/4" Sectional CableInductive Signal Clamp• Ideal for locating septic tanks.• 512 Hz signal.• Flashing LED indicates that sondeis transmitting.• Flushable.• Battery-powered.Cat No Description<strong>19</strong>793 Float Sondes (2), Plus Extra BatteryInductive Signal Clamp• With a SeeSnake FleXmitter you can locatea camera in a line (now standard withall SeeSnake reels).• If your SeeSnake camera isn’tequipped with a transmitter, you canupgrade your camera with a FleXmitter.Cat No Description15323 SeeSnake FleXmitter in-line transmitter15828 Mini-SeeSnake FleXmitter<strong>19</strong><strong>Hand</strong> <strong>Tools</strong>WWW.HANESSUPPLY.COM<strong>19</strong>-149
Change language