19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comDry Cut Saw/Model 614The Model 614 features carbide-tipped blades to cut different materialsand geometric configurations without cutting fluid. Cutting with the Model614 generates no burr, abrasive dust or heat, providing clean and fast cutson steel, copper, plastic and wood. Either straight or miter, the Model 614offers the largest cutting capacity in its class.Specifications• Powerful 15A Motor• Miter cut up to 45°• Blade dimensions 14" x 80T x 00087" x 1"• Spindle lock• Dust collector• Built-in maintenance tools• Exclusive quick-acting viseStandard EquipmentOne (1) dry cut saw with quick acting viseOne (1) 14" - 80 tooth blade (installed)Two (2) Maintenance ToolsCat No Model No Description Weight71687 614 Dry-Cut Saw, 115V, 60Hz 4772862 614 Dry-Cut Saw, 230V, 60Hz 47Blades for Model 61471697 12" Carbide-Tipped Blade 60 Tooth 271692 14" Carbide-Tipped Blade 80 Tooth 3Model 614 CapacityWorkpiece GeometryCutting Angle Circle Rectangle Square90° Cuts 5-1/8" O.D. 3-3/4" x 7" 4-3/4" x 4-3/4"45° Cuts 4-1/8" O.D. 3-1/3" x 4" 4-3/4" x 4-3/4"Power Pipe Cutter/Model 258 & 258XLThe RIDGID Model 258 Power PipeCutter cuts 21/2" to 8" schedule 10*/40steel pipe, galvanized pipe, rigid conduitetc. at the job site or in the shop.Powered by the RIDGID No. 700 PowerDrive, the 258 is a displacement cutterthat provides square cuts. The operatorcontrols the feedingrate by pumping theModel 258hydraulic foot pumpthroughout the operation.A square cut withminimal burr on either21' or nipple lengths ofpipe is achieved quickly**without abrasive dust, sparks,or open flame. Also, the RIDGID Pipe Roller for beveling can be used torotate the pipe while a second operator uses a grinder to bevel the pipe.Features:• Square cut 21' or nipple lengths of pipe without effort.• Easily cuts by displacing instead of removing pipe material.• No abrasive dust, dangerous sparks, or open flame.• Quickly cuts steel pipe with minimal burr.• Great for cutting pipe for groove joining.• Heavy-duty design is perfect for field or shop use.• Adaptable for beveling.Specifications:Cutting Capacity: Model 258 2-1/2" to 8" schedule 10*/40 steel pipeModel 700 Power Drive (not included)Power Drive RPM: 26-30 (no load)Weight: 105 lbs. (excludes No. 700 Power Drive)Standard Equipment:One (1) Ridgid 774 Square Drive AdapterOne (1) 8-1/2" HD Cutter Wheel AssemblyRidgidHand ToolsOne (1) Hydraulic ram and foot pumpTwo (2) 2-1/2" to 12" Ball Transfer Pipe Supports* Use the thin cutter wheel for best results**Cutting time varies with pipe schedule and diameterNote: Models 258 and 258XL are not recommended to cut cast iron pipeFor optimum wheel life always properly support the work piece with BallTransfer pipe supports.The Ridgid 258XL offers 8"-12" diameter pipe cutting capacity.Utilizing displacement type cutter wheel technology, the design enableslarger diameter pipe to be cut to length. The 258XL also uses the RIDGID700 Power Drive to rotate the heavy-duty cutter wheel. Now one personcan easily square cut 12" schedule 40 pipe in minutes.Specifications:Cutting Capacity: Model 258XL8" – 12" schedule 10*/40 steel pipeNo. 700 Power Drive (not included) RPM: 26-30 (no load)Weight: 140 lbs. (excludes No. 700 Power Drive)Standard EquipmentOne (1) Ridgid 774 Square Drive AdapterOne (1) 8-1/2" HD Cutter Wheel AssemblyOne (1) Hydraulic ram and foot pumpTwo (2) 2-1/2" to 12" Ball Transfer Pipe Supports.*Use the thin cutting wheel for best results.Note: For optimum wheel life properly support the workpiece with standard Ball transfer pipe supports.Cat. No. Model No. Description Wt. (lbs)50767 258 2-1/2" – 8" Pipe Cutter 10558227 258-XL 8" – 12" Pipe Cutter 140Note: 700 Power Drive not included.Accessories66687 – 8-1/2" HD Cutter Wheel Assembly 13(includes HD Cutter Wheel, hub w/pins, cover plate)50812 E-258 8-1/2" HD Cutter Wheel only 258222 E-258-T 8-1/2" Thin Wall Cutter Wheel Only (PVC & Steel) 254397 – Transport Cart 2460002 258PS Pipe Support 2-1/2" – 12" 760007 – Replacement Ball Transfer Head Set 5-1/261757 – Pipe Roller for Beveling (for Model 258 only) 13Hole Cutting Tool/Model HC-300The RIDGID Model HC300 Hole Cutting Toolis designed to cut holes up to 3" diameterinto steel pipe. The multiple hole sizeallows the use of fittings such asMechanical T®, Hookers®, Vic-O-Let,Weld-O-Let and others for branchingunpressurized pipelines.The HC300 features a 1/2" capacitychuck to accommodate all sizesof holes up to 3" diameterand standardhole saw arbors up to 7/16"Hex (1/2" chuck size).An integral motor and gear reduction optimizes the performance and sawlife in the capacity range. A single-feed handle and ON/OFF switch allowsfor easy operation. The compact two-piece design allows the HC300 to beused in tight quarters and difficult-to-reachlocations.The Model HC300 offers great features that translate into unparalleled fieldand shop performance.• Quick Connecting Two-piece Design. This unique design allows for easymounting, transport and set up. In addition, weighing only 31 lbs., theunit can be broken down into two lighter weight units for maximumtransport and operation comfort. This is particularly useful when workingoff a ladder or overhead• Single-hand Chain Latching. The Model HC-300 features a patentpending spring-loaded chain that saves time and significantly aidsset up and operation.19Hand ToolsWWW.HANESSUPPLY.COM19-133