19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

19Hand ToolsHand ToolsModel K-1500SP – For 2" to 10"Drain and Sewer Lines• All the features of the standard K-1500with extra power to clean larger lines(10") and longer distances (through 300feet). Cuts through blockages fast.• Equipped with full 1 HP TEFC motorand heavy-duty rotary switch.• Unique easy-to-use, instant-acting cableclutch maximizes operator control:– Pull handle down and cable spins at600 RPM.– Release frees cable instantly, no overrunto loop or damage cable.• Low-profile frame design will fit mostcrawl spaces.• 10" semi-pneumatic ball bearing wheels.• Easy clutch jaw change-out adapts the K-1500 SP to use 7/8" cableto clean 2" to 4" lines through 175 feet (order jawset A-368X, 59325).• CSA approved.• Approved to UL standards (NRTLC).K-1500SP W/C-11 shown above includes:• K-1500SP Machine with A-1 Mittand A-12 Pin Key.• A-34-12 Rear Guide Hose.• 150 Feet, Ten Sections of C-11, 1-1/4" Cable.• Three A-8 Cable Carriers.• Nine-Piece 11/4" Tool Package, includes:– T-1 Straight Auger. – T-3 Funnel Auger.– T-6 Retrieving Auger. – T-8 21/2" Grease Cutter.– T-13 21/2" Sawtooth Cutter. – A-2864 Hex Key (3/16").– A-3516 Hex Key (1/4"). – A-3 Tool Box.– T-50 Sharktooth Cutter with 3", 4" and 5" Blades.Machine Options - B Frame120V -60HzCat No220/240V-50HzModelDescription43507 43512 K-1500SP Machine with A-1 Operator’s Mitt and A-12 Pin Key,Plus:– A-34-12 Rear Guide Hose46907 – K-1500SP Machine with A-1 Operator’s Mittand A-12 Pin Key, Plus:– A-34-12 Rear Guide Hose– A-34-12 Rear Guide Hose– 150 Feet, Ten Sections of C-11, 1 1/4" Cable91027 – K-1500SP Machine with A-1 Operator’s Mitt and A-12 Pin Key– A-34-12 Rear Guide Hose– C-14 Three Carrier Cable Combination KitMachine Options - A FrameCat No120V 220/240VModel Description46837 – K-1500SPA Machine with A-1 Operator’s Mitt and A-12 Pin Key,Plus:– A-34-12 Rear Guide Hose46902 – K-1500SPA Machine with A-1 Operator’s Mitt and A-12 Pin Key,Plus:– A-34-12 Rear Guide Hose– 150 Feet, Ten Sections of C-11, 1 1/4" Cable– Three A-8 Cable Carriers91032 – K-1500SPA Machine with A-1 Operator’s Mitt and A-12 Pin Key,Plus:– A-34-12 Rear Guide Hose & C-14 Three CarrierC-14 Heavy-Duty Accessory KitComplete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comRidgidWeight(lb)141317297Weight(lb)150Cat No Model Description Weight48457 – C-14 Three-Carrier Cable Combination Kit Includes:– 150' C-14 Cable, Ten Sections 1 1/4"– Three Cable Carriers– A-3 Toolbox and A-12 Pin Key– T-2 HD Straight Auger; T-4 HD Funnel Auger;– T-6 Funnel Retrieving Auger; T-8 Spade Cutter;T-13 Saw Tooth Cutters; T-50 Sharktooth160317317Model K-750 – For 3" to 8"Drain/Sewer Lines• Powerful, self-contained machine idealfor lateral lines. Easy-to-transport, minimalset-up – attach a tool and go.• Autofeed advances, retrieves cableautomatically, up to 20' per minute.• Versatile powerfeed adjusts for either 5/8"or 3/4" cable with a twist of a screwdriver.– Recommend 5/8" cable for 3" to 6" drainlines up to 200'.– Recommended 3/4" cable for 4" to 10"drain lines up to 200'.• Cable spins at 200 RPM• Tough, corrosion-resistant cable drum withstands harsh treatment, abuse.It will not dent or corrode and cleans easily.• Drum holds 100 feet of 3/4" or 125 feet of 5/8" cable and is designedfor quick, easy removal.• Well-balanced design gives machine a light-weight “feel”. Transportwheel eases loading into service truck/van.Machine Options – PowerfeedCat. No. Model Wt.115v-60HZ 230V-50Hz No. Description (lbs)41977 44202 K-750 Machine with Gloves and 114Autofeed - 3/4" Pigtail51402 51407 K-750 Machine with Gloves and 113Powerfeed - 5/8" Pigtail42002 – K-750 Machine with One Pair of Gloves, 206w/C-75 Autofeed, Standard 3/4" Tool Set,and: C-75, 75' x 3/4" Cable42007 44212 K-750 Machine with One Pair of Gloves, 234w/C-100 Powerfeed, Standard 3/4" Tool Set,and: C-100, 100, x 3/4" Cable42012 44217 K-750 Machine with One Pair of Gloves, 182w/C-27 Powerfeed, Standard 5/8" Tool Set,and: C-27, 75' x 5/8" Cable47047 – K-750 Machine with One Pair of Gloves,w/C-24 Powerfeed, Standard 5/8" Tool Set,and: C-24, 100' x 5/8" CableStandard 3/4" Tool Set Includes:• T-406 Spear Blade Cutter• T-407 Retrieving Auger• T-411 2" CutterStandard 5/8" Tool Set Includes:• T-403 3" P-Trap Cutter• T-406 Spear Blade Cutter• T-413 3" Cutter• T-413 3" Cutter• T-414 4" CutterModel K-750 Accessories:5/8"5/8"3/4"3/4"– continues –Cables and Flexible LeadersK-750• T-407 Retrieving Auger• T-411 2" CutterCat. No. Model No. Description Wt. (lbs)92460 C-25 25' I.C. Cable 2492465 C-26 50' I.C. Cable 4392470 C-27 75' I.C. Cable 6343647 T-24 100' I.C. Cable 8432737 C-27HC 75' Hollow Core 52.7558192 C-24HC 100' Hollow Core 70.692475 C-28 25' I.C. Cable 3092480 C-29 50' I.C. Cable 6041212 C-75 75' I.C. Cable 9341697 C-100 100' I.C. Cable 12247427 C-75HC 75' Hollow Core 7547432 C-100HC 100' Hollow Core 10092555 T-458 5/8" x 2' Leader 1.9092560 T-468 3/4" x 2' Leader 2.7544122 – 5/8" Pigtail 2.544117 – 3/4" Pigtail 3.5See pages 19-156-157 for Cables and Accessories for K-150019-158WWW.HANESSUPPLY.COM