19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

19Hand ToolsHand ToolsFor SectionalMachinesFor DrumMachines19-160Model K-750 (continued) AccessoriesComplete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comCat. No. Model No. Description Wt. (lbs)60042 A-7534D Drum Assy. w/3/4" Pigtail 3161107 A-7558D Drum Assy. w/5/8" Pigtail 3060047 A-75DR Drum Only 2060032 A-75PF Power Feed Assy. 1060037 Power Feed Spacers41992 C-100 IC Kit w/Tools 3/4" x 100'49032 Front Guide Hose Assy. 2.8CablesRidgidFor Drain Guns, Sink Drums, and Small Line Sectional MachinesLength Size (in)/ Typical R/KModel (ft) Type Application Characteristics MachinesC-1 25 5/16" Drain Lines 3/4" to 1-1/2"Bulb Auger – Kitchen Sinks, Lavatory Sinks, Bathtub K-25/K-26C-21 50 " Drains, Drinking Fountains & Urinals (25' only)Drain Lines 3/4" to 1-1/2". Hollow Core Cables that Provide Maximum Flexibility for K-39C-2 25 5/16" Severe Bends and P-Traps. K-40Drop Head Drop Head Leads into Down Drain Pipes. K-50Especially Good for Back-To-Back MountedC-22 50 " Fixtures and Severe Bends.5/16" Drain Lines 1-1/4" to 2" K-25/K-26C-1IC 25 Inner Core – Kitchen Sinks, Lavatory Sinks, Slop Sinks (25' only)C-13IC 35 w/Bulb Auger and Laundry Lines. Inner Core Cables that provide Good Flexibility While K-395/16" Drop Head Leads into Down Drain Pipes, Delivering More Cleaning Power to Cable End. K-40C-2IC 25 Inner Core Especially Good for Back-To-Back Mounted Resists Kinking. K-3800C-23IC 35 w/Drop Head Fixtures and Severe Bends. K-50C-4 25 Drain Lines 1-1/4" to 2-1/2"3/8" – Kitchen Sinks, Lavatory Sinks, Slop Sinks K-39C-6 35 w/Male Coupling and Disposal Waste Lines K-40C-6IC 35 Flexible, Yet Tough 3/8" Cable Most Commonly Used After3/8" Drain Lines 1-1/4" to 2-1/2" Traps Have Been Removed. K-50C-5 35 w/Bulb Auger – Kitchen Sinks, Lavatory Sinks, Slop Sinksand Disposal Waste Lines.Length Size (in)/ Typical R/KModel (ft) Type Application Characteristics MachinesC-7 7-1/2 5/8 2" and 3" Floor Drains. Tight Wind Cable providing good rigidity in a hollow core K-50, K-60SPcable. Not for tree roots.K-75A/BC-8 7-1/2 5/8 Drain Lines 1-1/4" to 2". Open Wind Cable that is more flexible than C-7. Open Wind K-50, K-60SP– Ideal for Proper Cleaning of Small Lines. acts as an auger to thoroughly remove blockages in small lines. K-75A/B*C-9 10 5/8 Drain Lines 2" to 4". Heavy-Duty Open Wind Cable ideal for long K-50, K-60SP– Ideal for Floor Drains and Stacks. runs in indoor lines. K-75A/B*C-10 15 7/8 Drain Lines 2" to 4". Std. All-Purpose Open Wind. Excellent flexibility. K-60SP– Roof-Top Vent Stacks. K-1500A/B*C-11 15 1-1/4 Drain lines 3" to 8". Good for All Around Work. Std. All-Purpose Open Wind w/ 3/8" pitch. Flexible. K-1500A/B/– Easily Negotiates 4" Traps. Yet rigid enough to do fast, tough root cutting. & SpC-12 15 1-1/4 Drain Lines 4" to10". Extra-Heavy-Duty Open Wind 3/8" Pitch. K-1500A/B/– Do Not Use Through 4" "P" Traps. Designed for 4" to 10" long runs. & SPC-14 15 1-1/4 Drain Lines 3" to 10". Heavy-Duty Open Wind with 1/2" Pitch. Especially Good k-1500A/B/– Do Not Use Through 4" "P" Traps. For 4" Cleanout or 8" Elbow Entering in 4" to 10" Line. & SPC-15 15 1-1/4 Drain Lines 3" to 6" Extra-Flexible Open Wind with 1/2" Pitch. K-1500A/B– Ideal for 4" Traps.WWW.HANESSUPPLY.COMCat. No. Model No. Description Wt. (oz)31487 A-7570 5/8" Repair Splicer 1.592805 A-6582 5/8" Male Coupling 192810 A-6583 5/8" Female Coupling 231492 A-7571 3/4" Repair Splicer 292880 B-6840 3/4" Male Coupling 192885 B-6841 3/4" Female Coupling 241937 – Pair of Work Gloves .570032 – PVC Drain Cleaning Gloves59360 A-3 Tool Box 559987 Cable Rust Inhibitor 1 gal. 8.5Length Size (in)/ Typical R/KModel (ft) Type Application Characteristics MachinesC-3, C-31IW 50 3/8" Drain Lines 1-1/2" to 2-1/2"w/Inner Core – Kitchen Sinks, Lavatory Sinks, Slop Sinks Good flexibility. As torque builds, outer spring tightens on K-400C-32, C-32IW 75 " and Laundry Stacks. Wire core causing cable to stiffen & Transfer greater K-3800C-33, C-33IW 100 " torque to Cutter.C-44, C-44IW 50 1/2" Drain Lines 2" to 4"w/Inner Core – Laundry Stacks, Roof Vents and Same characteristics as above. Exceptional K-400C-45, C-45IW 75 " Indoor Floor Drains. flexibility and toughness for a 1/2" inner core cable. K-3800C-46 90 "C-25, C-25HD 25 5/8"w/Inner Core Drain Lines 3" to 4". General Purpose Cable. Inner core provides greater K-750C-26, C-26HD 50 " – Floor Drains, Vents and Laterals. Stiffness under load. K-6200C-27, C-27HD 75 " K-7500C-24, C-24HD 100 "C-27HC 75 5/8" Drain Lines 3" to 4". Hollow core cable is lighter in weight & more flexible. K-750C-24HC 100 w/Hollow Core – Floor Drains, Vents, Laterals. Helps operator negotiate difficult traps & bends in large K-7500lines.C-28 25 3/4"w/Inner Core Drain Lines 4" to 10". Powerful cable used for heavy-duty blockages such asC-29 50 " – Main Lines Including Laterals. tree roots. Tightens on core to provide extra stiffness K-750C-75 75 " under load. Delivering power to cutter. K-7500C-100 100 "C-75HC 75 3/4" Drain Lines 4" to 6" Hollow core cable is lighter in weight and more flexible.w/Hollow Core – Main Lines including Laterals. Helps operator negotiate difficult traps and bends in large K-750C-100HC 100 " lines. K-7500