19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.com2-1/2" Drive Impact Drive ToolsImpact Retainer Pins• Should be used with 2-1/2" drive impactsockets and drive tools.Cat. EDP Dia. LengthNo. No. (in) (in) Lbs. Kgs. For Use On9-2G 55359 5/16 2-7/8 2.22 1.00 2-1/2": Fits all sizesImpact O-Rings• Must be used with 2-1/2" drive impact sockets and drive tools.• Made of material compounded for resistance to oils.Cat. EDP Dia.No. No. (in) Lbs. Kgs. For Use On9-1D 55630 4-1/8 .50 .23 2-1/2": Fits all sizesC-ClampsHeavy Service C-ClampsFed. Spec.: GGG-C-406DEspecially designed for heavy duty service,frames are drop-forged and heat-treated for maximumstrength and reduced “springing”. Screws aremade of special grade steel and are heat-treated foradded strength not found in case hardened screws.To tighten, the square headed screw must be turnedwith a wrench. Where zero capacity is desired,clamps should be ordered with long screws.• Ideal for the most demanding applications such asconstruction and heavy industry.• Square head screw allows tightening with wrenchfor extra heavy duty clamping requirements.• Greater anvil surface for gripping larger work piecesand for greater stability.Williams ToolsDeep Throat C-Clamps with Copper ScrewFed. Spec.: GGG-C-406DWilliams CC-400 series deep throat C-Clamps are manufacturedto the highest standards of the industry. Ideal forwelding as well as general purpose applications.• I-beam design for added strength.• Drop-forged and heat-treated for maximum strengthand greater rigidity.• Highly resistant to “springing”.• Copper plated screw to resist welding splatter.Hand ToolsDpt. of Extreme ExtremeThraot Body Dim. Body Dim. ScrewCat. EDP Cap. Cap. From Ctr. Length Width Dia. Wt.No. No. (Max) (Min) (in) (in) (in) (in) (lbs)CC-402 84056 2 0 2-11/32 5-5/16 4 1/2 1.30CC-403 84057 3 0 2-3/4 6-3/4 4-5/8 1/2 2.04CC-404 84058 4 0 3-3/16 8-3/8 5-3/8 3/4 3.50CC-406 84059 6 0 4-1/8 11 6-1/4 3/4 5.42CC-408 84060 8 0 5-3/16 13-1/2 7-1/2 3/4 6.90CC-410 84061 10 0 6 16-1/4 8-5/8 3/4 11.66CC-412 84062 12 0 6-1/2 18-3/4 9-1/2 7/8 15.04Chain WrenchesForged Handled is fully heat-treated. Ideal for use in close quarters andwhere space is at a premium. Successive “bites” can be taken withoutremoval of wrench from the work piece.• Fully adjustable to fit any shape pipe.• Forged handle for greaterstrength.• Chain available separately –order as CW-4-1.Cap. Cap. Handle ChainCat. EDP Pipe. Dia. Pipe Dia. Length Length WtNo. No. (Min) (Max) (in) (in) (lbs)CW-4 15022 3/8 4 11 15 1.74Replacement ChainCatalog #CW-4-1,EDP #15023Depth of Extreme ScrewThraot Body Dim. Screw Lgth.Cat. EDP Cap. Cap. From Ctr. Width Dia. Und. Hd. Wt.No. No. (Max) (Min) (in) (in) (in) (in) (lbs)CC-1AAW 84146 1-3/8 0 1-1/8 2-23/32 13/32 2-7/16 .80CC-1-1/2AAW 84147 1-7/8 0 1-21/32 3-19/32 5/8 3-1/4 1.98CC-2AAW 84148 2-11/32 0 1-7/8 4-1/4 23/32 4-1/8 3.74CC-3AAW 84150 3-7/16 1/8 2-13/32 5-3/4 27/32 4-7/8 5.95CC-3LAAW 84151 3-7/16 0 2-1/2 5-3/4 27/32 5-3/4 7.40CC-4AAW 84152 4-21/32 17/32 2-7/8 6-1/4 27/32 6 10.50CC-4LAAW 84153 4-21/32 0 2-7/8 6-1/4 27/32 7-1/4 10.82CC-5AAW 84154 5-5/8 1/2 3-1/8 7 27/32 7-1/4 13.80CC-5LAAW 84156 5-5/8 0 3-1/8 7 27/32 8-7/8 14.00CC-6AAW 84157 6-1/2 1-5/32 3-1/2 7-1/2 1-3/32 8 18.72CC-6LAAW 84159 6-1/2 0 3-1/2 7-1/2 1-3/32 10 19.44CC-8AAW 84160 8-1/2 4 3-11/16 8-1/2 1-3/32 7-1/8 23.92CC-8LAAW 84161 8-1/2 0 3-11/16 8-1/2 1-3/32 11-5/8 25.84CC-10AAW 84162 10-3/8 5-3/8 4-3/8 8-1/2 1-3/32 7-3/4 33.76CC-10LAAW 84163 10-3/8 0 4-5/16 8-1/2 1-3/32 14-3/8 36.70CC-12AAW 84164 12-3/8 7-1/4 4-7/16 9-1/2 1-3/32 8-1/4 39.10CC-12LAAW 84165 12-3/8 0 4-1/4 9-1/2 1-3/32 16-7/16 43.84Original Chain Pipe TongFed. Spec.: GGG-W-00651D-1The “original” Williams Chain Pipe Tong is still the favorite tong for generalwork. Chain swings from the center and can be used on either side of thejaws, which reduces tooth wear. Flat link chains are heat-treated for greaterstrength and reliability.• Fully adjustable to fit anyshape pipe.• Heat-treated chains forgreater strength.Pipe Dia. Tong Chain LoadingCat. EDP Min. Max Length Length Cap Wt.No. No. (in) (in) (in) (in) (lbs.) (lbs)CT-12 10003 1/4 2-1/2 27 18-1/2 13,800 9.48CT-13 10004 3/4 4 38-1/8 25 17,600 17.42CT-13-1/2 10005 1 6 46-1/4 33 20,000 23.98CT-14 10006 1-1/2 8 50-1/2 40-3/4 22,000 31.00CT-15 10007 2 12 67 56 31,000 52.0019Hand ToolsWWW.HANESSUPPLY.COM 19-203