19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

More documents

Recommendations

Info

19Hand ToolsHand ToolsFor SectionalMachinesFor DrumMachines19-160Model K-750 (continued) AccessoriesComplete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comCat. No. Model No. Description Wt. (lbs)60042 A-7534D Drum Assy. w/3/4" Pigtail 3161107 A-7558D Drum Assy. w/5/8" Pigtail 3060047 A-75DR Drum Only 2060032 A-75PF Power Feed Assy. 1060037 Power Feed Spacers41992 C-100 IC Kit w/Tools 3/4" x 100'49032 Front Guide Hose Assy. 2.8CablesRidgidFor Drain Guns, Sink Drums, and Small Line Sectional MachinesLength Size (in)/ Typical R/KModel (ft) Type Application Characteristics MachinesC-1 25 5/16" Drain Lines 3/4" to 1-1/2"Bulb Auger – Kitchen Sinks, Lavatory Sinks, Bathtub K-25/K-26C-21 50 " Drains, Drinking Fountains & Urinals (25' only)Drain Lines 3/4" to 1-1/2". Hollow Core Cables that Provide Maximum Flexibility for K-39C-2 25 5/16" Severe Bends and P-Traps. K-40Drop Head Drop Head Leads into Down Drain Pipes. K-50Especially Good for Back-To-Back MountedC-22 50 " Fixtures and Severe Bends.5/16" Drain Lines 1-1/4" to 2" K-25/K-26C-1IC 25 Inner Core – Kitchen Sinks, Lavatory Sinks, Slop Sinks (25' only)C-13IC 35 w/Bulb Auger and Laundry Lines. Inner Core Cables that provide Good Flexibility While K-395/16" Drop Head Leads into Down Drain Pipes, Delivering More Cleaning Power to Cable End. K-40C-2IC 25 Inner Core Especially Good for Back-To-Back Mounted Resists Kinking. K-3800C-23IC 35 w/Drop Head Fixtures and Severe Bends. K-50C-4 25 Drain Lines 1-1/4" to 2-1/2"3/8" – Kitchen Sinks, Lavatory Sinks, Slop Sinks K-39C-6 35 w/Male Coupling and Disposal Waste Lines K-40C-6IC 35 Flexible, Yet Tough 3/8" Cable Most Commonly Used After3/8" Drain Lines 1-1/4" to 2-1/2" Traps Have Been Removed. K-50C-5 35 w/Bulb Auger – Kitchen Sinks, Lavatory Sinks, Slop Sinksand Disposal Waste Lines.Length Size (in)/ Typical R/KModel (ft) Type Application Characteristics MachinesC-7 7-1/2 5/8 2" and 3" Floor Drains. Tight Wind Cable providing good rigidity in a hollow core K-50, K-60SPcable. Not for tree roots.K-75A/BC-8 7-1/2 5/8 Drain Lines 1-1/4" to 2". Open Wind Cable that is more flexible than C-7. Open Wind K-50, K-60SP– Ideal for Proper Cleaning of Small Lines. acts as an auger to thoroughly remove blockages in small lines. K-75A/B*C-9 10 5/8 Drain Lines 2" to 4". Heavy-Duty Open Wind Cable ideal for long K-50, K-60SP– Ideal for Floor Drains and Stacks. runs in indoor lines. K-75A/B*C-10 15 7/8 Drain Lines 2" to 4". Std. All-Purpose Open Wind. Excellent flexibility. K-60SP– Roof-Top Vent Stacks. K-1500A/B*C-11 15 1-1/4 Drain lines 3" to 8". Good for All Around Work. Std. All-Purpose Open Wind w/ 3/8" pitch. Flexible. K-1500A/B/– Easily Negotiates 4" Traps. Yet rigid enough to do fast, tough root cutting. & SpC-12 15 1-1/4 Drain Lines 4" to10". Extra-Heavy-Duty Open Wind 3/8" Pitch. K-1500A/B/– Do Not Use Through 4" "P" Traps. Designed for 4" to 10" long runs. & SPC-14 15 1-1/4 Drain Lines 3" to 10". Heavy-Duty Open Wind with 1/2" Pitch. Especially Good k-1500A/B/– Do Not Use Through 4" "P" Traps. For 4" Cleanout or 8" Elbow Entering in 4" to 10" Line. & SPC-15 15 1-1/4 Drain Lines 3" to 6" Extra-Flexible Open Wind with 1/2" Pitch. K-1500A/B– Ideal for 4" Traps.WWW.HANESSUPPLY.COMCat. No. Model No. Description Wt. (oz)31487 A-7570 5/8" Repair Splicer 1.592805 A-6582 5/8" Male Coupling 192810 A-6583 5/8" Female Coupling 231492 A-7571 3/4" Repair Splicer 292880 B-6840 3/4" Male Coupling 192885 B-6841 3/4" Female Coupling 241937 – Pair of Work Gloves .570032 – PVC Drain Cleaning Gloves59360 A-3 Tool Box 559987 Cable Rust Inhibitor 1 gal. 8.5Length Size (in)/ Typical R/KModel (ft) Type Application Characteristics MachinesC-3, C-31IW 50 3/8" Drain Lines 1-1/2" to 2-1/2"w/Inner Core – Kitchen Sinks, Lavatory Sinks, Slop Sinks Good flexibility. As torque builds, outer spring tightens on K-400C-32, C-32IW 75 " and Laundry Stacks. Wire core causing cable to stiffen & Transfer greater K-3800C-33, C-33IW 100 " torque to Cutter.C-44, C-44IW 50 1/2" Drain Lines 2" to 4"w/Inner Core – Laundry Stacks, Roof Vents and Same characteristics as above. Exceptional K-400C-45, C-45IW 75 " Indoor Floor Drains. flexibility and toughness for a 1/2" inner core cable. K-3800C-46 90 "C-25, C-25HD 25 5/8"w/Inner Core Drain Lines 3" to 4". General Purpose Cable. Inner core provides greater K-750C-26, C-26HD 50 " – Floor Drains, Vents and Laterals. Stiffness under load. K-6200C-27, C-27HD 75 " K-7500C-24, C-24HD 100 "C-27HC 75 5/8" Drain Lines 3" to 4". Hollow core cable is lighter in weight & more flexible. K-750C-24HC 100 w/Hollow Core – Floor Drains, Vents, Laterals. Helps operator negotiate difficult traps & bends in large K-7500lines.C-28 25 3/4"w/Inner Core Drain Lines 4" to 10". Powerful cable used for heavy-duty blockages such asC-29 50 " – Main Lines Including Laterals. tree roots. Tightens on core to provide extra stiffness K-750C-75 75 " under load. Delivering power to cutter. K-7500C-100 100 "C-75HC 75 3/4" Drain Lines 4" to 6" Hollow core cable is lighter in weight and more flexible.w/Hollow Core – Main Lines including Laterals. Helps operator negotiate difficult traps and bends in large K-750C-100HC 100 " lines. K-7500
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comWater Jetters:Model KJ-1350 & KJ-1750 Jets1-1/4" - 4" Drain LinesThese jetters propel a highly flexible hose through 1-1/4" to 4" lines - blastingthrough sludge, soap, and grease blockages. As you pull the hoseback, it power scrubs the line, flushing debris away and restoring drainlines to their free flowing capacity.• Easy to use: Thrust propels the hose down the line. You simply guidethe hose into the drain.• High Quality: Duplex pump with corrosion resistant, forged, brass head.New pressure control valve allows quick and easy pressure adjustment.• Dependable: Reduced number of fittings, hoses, and parts minimizesleaks and down time - keeping you on the job.• Versatile: Optional power washer package cleans cables, tools andother heavily soiled equipment.RidgidModelKJ-1350-ConH-10 CartKJ-1350 Water Jetter• Powerful: Actual working pressureof 1350 psi and flow of 1.4 GPM forfast, effective cleaning of lines.• Pulse Action: Activate the KJ-1350'spulse action to easily negotiate difficultbends and traps. The KJ-1350-2 has asecond level of pulse.• Portable and Compact:The optional H-10 Cart rolls the jetter and hoseto the job site. Jetter and hose reel are easilyremoved from the cart in seconds for hard to reachdrains or remote storage. The compact cart offersa retractable handle and swivel hose reel minimizing storage space.Optional adapter allows the KJ-1350 to be mountedon the upright H-30 Cart.• Electrical Requirement: The 1.5 hp motor draws a maximumof 14 amps and can run on most standard 115-volt circuits.KJ-1750 Water Jetter• Powerful: Actual working pressure of 1750 psi and flow of 1.4 GPM forfast effective cleaning of lines.• Pulse Action: Two levels of pulse arestandard. Activate the KJ-1750's pulse actionto easily negotiate difficult bendsand traps.• Portable: The optional H-30 Cart rolls the jetterand hose to the job site. The jetter is easilyremoved from the cart in seconds for hard toreach drain or for remote storage. Optionaladapter allows the KJ-1750 tobe mounted on the compact H-10 Cart.• Electrical Requirement: The 2.0 hp motordraws a maximum of 17 amps which requiresa 20 amp, 115-volt circuit.Hand ToolsModel KJ-1350 and KJ-1750 Accessories:Machine Options (115V)Cat. No. Model No. Description Wt. (lbs)62587 KJ-1350 KJ-1350 Standard Jetter w/Pulse 70– H-21, H-22, and H-24 1/8" NPT Nozzles– 25' x 1/8" Sink Trap Hose– Nylon Storage Bag– Nozzle Cleaning Tool62597 KJ-1350-C Above with: 120– H-10 Cart– 100' x 1/4" Trap Hose63107 KJ-1350-2 KJ-1350 Jetter w/Dual Pulse 72– H-21, H-22 and H-24 1/8" NPT Nozzles– 50' x 1/8" Sink Trap Hose– Nylon Storage Bag– Nozzle Cleaning Tool63112 KJ-1350-2C Above with: 122– H-10 Cart– 100' x 1/4" Trap Hose62687 KJ-1750 KJ-1750 Jetter w/Dual Pulse 75– H-41, H-42, and H-44 1/8" NPT Nozzles– H-51 and H-52 1/4" NPT Nozzles– 50' x 1/8" Sink Trap Hose– Nylon Storage Bag– Nozzle Cleaning Tool62697 KJ-1750-C Above with: 155– H-30 Cart– 110' x 1/2" Jet Hose67332 KJ-1750-SC 62687 with: 125– H-10 Cart– 100' x 1/4" Trap HoseJetter Nozzles and HosesCat. Model Hose HoseNo. No. Description I.D O.D.64707 H-21 KJ-1350 Propulsion Nozzle 1/8" Female NPT – –64712 H-22 KJ-1350 Penetrating Nozzle 1/8" Female NPT – –64717 H-24 KJ-1350 Drop Head Nozzle 1/8" Female NPT – –82832 H-25 KJ-1350 Spinning Nozzle 1/8" Female NPT – –64722 H-31 KJ-1350 Propulsion Nozzle 1/4" Female NPT – –64727 H-32 KJ-1350 Penetrating Nozzle 1/4" Female NPT – –64742 H-41 KJ-1750 Propulsion Nozzle 1/8" Female NPT – –64747 H-42 KJ-1750 Penetrating Nozzle 1/8" Female NPT – –64752 H-44 KJ-1750 Drop Head Nozzle 1/8" Female NPT – –82837 H-45 KJ-1750 Spinning Nozzle 1/8" Female NPT64757 H-51 KJ-1750 Propulsion Nozzle 1/4" Female NPT – –64762 H-52 KJ-1750 Penetrating Nozzle 1/4" Female NPT – –52957 H-1825 1/8" x 25' Sink Trap Hose 1/8" Male NPT 1/8" 3/16"53037 H-1850 1/8" x 50' Sink Trap Hose 1/8" Male NPT 1/8" 3/16"47597 H-1435 3/16" x 35' 1/8" Male NPT 3/16" 1/4"47602 H-1450 3/16" x 50' 1/8" Male NPT 3/16" 1/4"49272 H-1475 3/16" x 75' 1/8" Male NPT 3/16" 1/4"49277 H-1400 3/16" x 100' 1/8" Male NPT 3/16" 1/4"64732 H-1415 3/16" x 150' 1/8" Male NPT 3/16" 1/4"50002 HL-1 12" Flexible Leader 1/8" Male & Female NPT 1/8" 3/16"50007 HL-2 18" Flexible Leader 1/8" Male & 1/4" Female NPT 1/8" 3/16"47607 H-1250 1/4" x 50' 1/4" Male NPT 1/4" 1/2"51587 H-1211 1/4" x 110' 1/4" Male NPT 1/4" 1/2"49487 H-1215 1/4" x 150' 1/4" Male NPT 1/4" 1/2"51597 H-1220 1/4" x 200' 1/4" Male NPT 1/4" 1/2"Jetter NozzlesModel H-21 and H-31 (KJ-1350) & Model H-41and H-51 (KJ-1750) Propulsion NozzlesGeneral-purpose nozzle that works well in most applications. Featuresthree reverse thrusters for maximum propulsion to jet long distances.Model H-22 and H-32 (KJ-1350) & Model H-42and H-52 (KJ-1750) Penetrating NozzlesPenetrating nozzle features an additional forward pointing jetthat blasts a hole in solid ice or sludge blockages. Three reversejets provide propulsion.Model H-24 Drop Head Nozzle (KJ-1350)& Model H-44 Drop Head Nozzle (KJ-1750)Allows jetter hose to negotiate difficult bends and traps.Three reverse thrusters provide propulsion.Model H-25 Spinning Nozzle (KJ-1350)& Model H-45 Spinning Nozzle (KJ-1750)Spinning action cleans the entire interior of pipe surface.Three reverse jets provide propulsion.Jetter AccessoriesWWW.HANESSUPPLY.COMCat. No. Model No. Description64697 H-10 H-10 Cart w/Hose Reel62592 H-10 WH H-10 Cart w/Hose Reel and 100' x 1/4" Trap Hose62882 H-5 Mini Hose Reel (fits H-10 Cart) 150' x 1/4" Capacity64737 H-30 H-30 Cart w/Hose Reel62877 H-30 WH H-30 Cart w/Hose Reel and 110' x 1/2" Jet Hose62887 HP-EL Pressure Wash Package, Electric Jetters64702 HW-EL Wash Wand, Electric Jetters51572 H-1235 1/2" x 35' Wash Hose62897 H-10A KJ-1750 Adapter to Fit H-10 Cart62892 H-30A KJ-1350 Adapter to Fit H-30 Cart48367 H-25 Winterizing Kit47542 H-21 Nozzle Cleaning Tool67187 H-32 Jet Vac70032 – PVC Drain Cleaning Gloves41937 – Leather Drain Cleaning Gloves62757 – Nylon Storage Bag19-16119Hand Tools
Page 3 and 4: Complete Contractor and Industrial
Page 19 and 20: AccessoriesComplete Contractor and
Page 35: Complete Contractor and Industrial
Page 39 and 40: Retractable Utility Knife• Interl
Page 47 and 48: ForksComplete Contractor and Indust
Page 87 and 88:
Complete Contractor and Industrial
Page 89 and 90:
Page 91 and 92:
show all

19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?