19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

19Hand ToolsHand ToolsComplete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.comVISE ASSESSORIES:Wilton Magnefix Vise Jaw CapsTemporary Work-Holding Systems• Designed to protect both the vise jaws and the workpiece from marringand distortion during any clamping application.• Caps are constructed from a hardened aluminum alloy with two built-incircular permanent magnets on the backside which holds the productsecurely to the vise.• The caps are magnetic towards the vise side to prevent steel filings fromattaching themselves to the jaws and keep the clamped part frombecoming magnetized.AluminumModel A - Aluminum MagnefixJaw Caps• Aluminum alloy design includes 6grooves to compensate for theunevenness of the workpiece• Deeper Vee-Groove ensures moresecure clamping of circular work pieces. Rubber• Use together with RubberMagnefix Jaw Caps when clampingtaper pins and spherical partsModel F - Fiber FaceMagnefix Jaw Caps• Aluminum alloy with laminatedfiber cover to prevent the absorptionof outside materials• Heat parts rapidly by concentratingheat into part• Use on workpieces to avoid distortionand clamping marksModel R - Rubber FaceMagnefix Jaw Caps• Aluminum alloy with syntheticrubber cover• Jaw Cap conforms to workpieceand grips firmly without slippingwhile protecting work surface• Use in combination withAluminum and Prism Jaw Caps toclamp taper pins or tapered workpiecesModel P - Prism MagnefixJaw Caps• Jaw construction includes a 120 O , horizontal Vee-Groove, 3 verticalVee-Grooves and a 90 O groove for marking out and center punching• Ideal for light tapping and thread cutting applicationsWilton Copper Jaw CapsPermanent or Temporary Work-Holding• Designed to avoid marring the surface of softer metals and to protectjaw face.• 100% Copper Jaw Caps havepolished faces and pliable copperextensions for a sure-grip fit onany make vise.Wilton Tool GroupFiberPrismCat. UPC Jaw Net Wt.No. Item No. Width (in) (lbs.)Model A - Standard Aluminum MagnefixJaw CapsA-3 14826 3 1A-4 14828 4 0.4A-4.5 14829 4-1/2 0.25A-5 14830 5 0.35A-5.5 14871 5-1/2 1A-6 14831 6 0.45A-6.5 14874 6-1/2 1Model F - Fiber Face Magnefix Jaw CapsF-4 14834 4 0.9F-4.5 14835 4-1/2 1F-5 14836 5 1F-6 14837 6 0.3Model R - Rubber Face Magnefix Jaw CapsR-3 14838 3 1R-4 14840 4 0.2R-4.5 14841 4-1/2 0.2R-5 14842 5 0.25R-5.5 14872 5-1/2 1R-6 14843 6 0.35R-5.5 14875 6-1/2 0.3Model P - Prism Magnefix Jaw CapsP-4 14846 4 1P-4.5 14847 4-1/2 0.45P-5 14848 5 0.25P-5.5 14873 5-1/2 1P-6 14849 6 0.2P-6.5 14876 6-1/2 0.3Cat. UPC Jaw Net Wgt.No. Item No. Width (in) (lbs)404-3 24403 3 0.40404-3-1/2 24404 3-1/2 0.55404-4 24405 4 0.90404-4-1/2 24406 4-1/2 0.85404-5 24407 5 1.20404-5-1/2 63203 5-1/2 1.55404-6 24408 6 2.40404-6-1/2 63204 6-1/2 2.50404-8 24409 8 4.40Wilton Drill Press Vises:Versatile Drill Press VisesWilton Versatile Drill Press Vises are constructed of high grade cast iron.Hardened jaws come standard with v-grooves for horizontal and verticalclamping of round objects.• Made from high grade cast iron• Ground vise bed for smooth, consistent jaw movement• Hardened top V-groove jaws• Rugged design and large workload capacityUPC Jaw Jaw Jaw NetCat. Item Width Opening Depth Wt.No. No. (in) (in) (in) (lbs)Continuous Nut1335 63238 3 2-3/4 1-7/8 5.901345 63239 4 4 2-1/8 11.851360 63240 5 5 2-1/8 19.35Rapid Acting Nut1435 63241 3-1/2 4-1/4 1-3/4 10.851445 63242 4-1/2 4-3/4 1-7/8 15.251460 63243 6 6-3/4 2-1/8 28.5014351345Cam Action Drill Press VisesA simple push or pull on the center bar knob sets the jaw in position.Then an easy press on the locking lever cams the jaw ahead 3/32",exerting a holding pressure that is adjustable from 400 to 1100 lbs.• Simple push or pull on the center bar knob sets the jaw in position• Easy press locking lever cams thejaw ahead 3/32”, exerting a holdingpressure that is adjustable from 400to 1100 lbs• Base is designed for clear throughdrilling applications• Unique top locking lever can beraised or lowered to tighten or1206loosen against the work piece.UPC Jaw Jaw Jaw Overall NetCat. Item Width Opening Depth Height Wt.No. No. (in) (in) (in) (in) (lbs.)1203 13400 3 1-1/4 3 2-3/4 10.151204 13401 4 1-5/16 4-11/16 3-1/4 17.71206 13402 6 1-13/16 6-3/16 3-3/4 35.41208 13403 8 2 8-3/16 4-7/16 53.35Milling Machine VisesComplete with swivel base, the 50S and 60S are ideal for milling, tappingand drilling operations. Two bolt lugs make mounting easy and vise canalso be mounted on its stationary base.• Swivel base is finely graduatedfor accurate set up of workpiecesrequiring accurate clamping.• High-carbon steel jaws.• High quality steel main screw utilizesa fine Acme thread for strength.UPC Jaw Jaw Jaw Overall Ship.Cat. Item Width Opening Depth Height Wt.No. No. Description (in) (in) (in) (in) Lbs. Ea.50S 12365 Milling Vise w/swivel base 5 3-1/4 1-5/8 5-1/8 4060S 12370 Milling Vise w/swivel base 6 4-3/8 1-7/8 5-9/16 6319-206WWW.HANESSUPPLY.COM