<strong>Hand</strong> <strong>Tools</strong>LEVER BENDERS:300 Series Plumbing Benders• Designed to bend copper tubingto a maximum of 180°.• Offset cushion grip handles and a 90°start angle, together with a speciallyengineered plastic shoe, combine toease bending effort.• 300 series lever benders form smoothbends in types K & L soft (annealed)copper tubing.Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since <strong>19</strong>30Visit us online at www.hanessupply.com300 SeriesCapacityCat. Model Tube Size Bend Wt.No. No. Description (Actual O.D.) Radius (lbs)36962* 310 Lever Bender 5/8 2-1/4 6.536972 312 Lever Bender 3/4 2-7/8 7.036942 310M Lever Bender 10 mm 42 mm 4.036947 312M Lever Bender 12 mm 42 mm 4.036952 314M Lever Bender 14 mm 56 mm 6.536957 315M Lever Bender 15 mm 56 mm 6.536962* 316M Lever Bender 16 mm 56 mm 6.536967 318M Lever Bender 18 mm 72 mm 7*This product is dual-purpose, being both inch and metric.400 Series Instrument Benders• 400 Series Instrument Benders combineaccuracy with easy operation. Offset cushiongrip handles eliminate knuckle cracking whenforming 180° bends.• A 90° start angle and unique oil-absorbingshoe minimize bending effort while formingaccurate bends in copper, steel andstainless steel tubing.CapacityCat. Model Tube Size Bend Wt.No. No. Description (Actual O.D.) Radius (lbs)36117 403 Lever Bender 3/16 5/8 1.536122 404 Lever Bender 1/4 5/8 1.536092* 405 Lever Bender 5/16 15/16 2.7536097 406 Lever Bender 3/8 15/16 2.7536132 408 Lever Bender 1/2 1-1/2 5.536112 406M Lever Bender 6 mm 16 mm 1.536092* 408M Lever Bender 8 mm 24 mm 2.7536102 410M Lever Bender 10 mm 24 mm 2.7536127 412M Lever Bender 12 mm 38 mm 5.5*This product is dual-purpose, being both inch and metric.400 SeriesRidgid600 Series Instrument Tubing BenderThe RIDGID® 600 Series Lever Benders are specially designed forbending hard tubing such as stainless steel, steel and titanium. A simpletwo-stage handle design easily switches to bend up to 180°, keepingbends in-plane and accurate.• In-Plane: Two-stage design allows bends from 90° to 180° without evercrossing handles; lock/unlock with a half-turn rotation of the bendinghandle.• Accurate: Roll dies in bending carriage reduce tube flattening (ovality).Gain marks on front of form ensure properly aligned bending angles.• Reduced Force: Extra-long handles for increased leverage; vise clampblock for extra stability.• Ergonomic: Cushioned handle grips for improved bending ease.Cat. Model Bend Wt.No. No. Cap. Radius (lbs)38028 603 5/8 5/8 1.6838033 604 1/4 5/8 1.6838038 605 5/16 15/16 4.138043 606 3/8 15/16 4.138048 608 1/2 1-1/2 6.138053 606M 6mm 16mm 1.6838038 608M 8mm 24mm 4.138058 610M 10mm 24mm 4.138063 612M 12mm 38mm 6.1Geared Ratchet Lever-Type Tube Benders• High geared mechanical ratios,bend heavy-wall steel tube (upto 1/8" wall thickness), stainlesssteel tube (up to 3/32" wall thickness)and hard copper water tube(types K and L).• Benders produce uniform bendsup to 180°, with no need to annealtubing or use special temper grade tubing.• Reduce bending effort to a minimum.Radius to TubeCat. Model Center of O.D. Wt.No. No. Tube (in) (in) (lbs)35170 358 3 5/8 7-1/235175 368 3-3/4 3/4 13-1/235180 378 3-3/4 7/8 13-1/2Spring-Type Tube BendersFor fast, free-form bending of soft copper and aluminum tube.<strong>19</strong>456 Tri-BenderThe 456 Tri-Bender is designed to easilybend three different sizes of soft tubing: 1/4",5/16" and 3/8" with the same tool. Ideal forplumbing and HVAC applications. A 90°start angle minimizes effort required to forma bend. <strong>Hand</strong>y reference marks indicatethe angle for quick bends through 90°.Cat. Model Cap. Wt.No. No. (in) (oz)44852 456 1/4, 5/16, 3/8 14Cat. Model Length Tube O.D. Wt/Pk.No. No. Description (in) (in) (lbs)35245 D-1375 Pack of 6 Spring-Type Benders 10 1/4 3/835250 D-1376 Pack of 6 Spring-Type Benders 10 5/16 135255 D-1377 Pack of 6 Spring-Type Benders 10 3/8 135260 D-1378 Pack of 6 Spring-Type Benders 12 7/16 1-5/835265 D-1379 Pack of 6 Spring-Type Benders 12 1/2 2-5/835270 D-1380 Pack of 6 Spring-Type Benders 12 5/8 3-1/435275 D-1381 Pack of 6 Spring-Type Benders 12 3/4 3-3/435280 D-1382 Pack of 6 Spring-Type Benders 12 7/8 4-1/8Spring-Type Bender Sets35285 E-5732 Set of 6, 1/4 - 5/8 1-3/435290 E-5734 Set of 8, 1/4 - 7/8 3<strong>Hand</strong> <strong>Tools</strong><strong>19</strong>-138WWW.HANESSUPPLY.COM
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since <strong>19</strong>30Visit us online at www.hanessupply.comCONDUIT BENDERS:Heavy-Wall Conduit Benders• Designed for the larger sizes of heavy-wall conduit.This bender has hardened teeth for slip-resistant grip.• Extra-long supporting socket minimizes handle breakage.• Notch in radius protects conduit threads.Cat. Model Cap. Wt.No. No. (in) (lbs)35230 B-1709 1/2 2-5/835235 B-1711 1/2, 3/4 2-3/435240 B-1712 1, 1-1/4 7-3/4<strong>Hand</strong>les not included.Thin-Wall Conduit Benders• Made of cast iron, these tools haveexceptionally smooth side walls whichgrip conduit snugly to minimize distortion.• Bending grooves conform to Standard Code Radii.Marks indicate 30°,45°, 60° and 90° bends.Cat. Model Wt.No. No. Description (lbs)35215 B-1677 Bends 1/2" Thin-Wall Conduit to 2-1/24" Inside Radius35220 B-1678 Bends 3/4" Thin-Wall and 1/2" 4-1/2Heavy-Wall Conduit to 5" Inside Radius35225 B-1679 Bends 1" Thin-Wall and 3/4 8-1/2Heavy-Wall Conduit to 6-1/2" Inside RadiusNo. 4100 Inner-OuterCopper Cleaning Brush• Combines tube O.D. cleaning andfitting I.D. brush into one hand tool.• High carbon steel brushes quicklyclean 1/2" or 3/4" nominal tube andfittings in preparation for soldering or brazing.• Durable plastic construction designed for easy brush replacement.Cat. Model Wt.No. No. Cap. (oz)34142 4100 I-O Copper Cleaning Brush 3.2534147 — Replacement Brush Set 1.5Accessories for No. 124Copper Cleaning MachineCleaning Brushes: 13 internal, standard-duty wire for 1/2" – 4" fittingsExternal Cleaning Brush and Deburring Cutter: For 1/2" – 2" fittingsand 1/2" – 4" tubeReamer: Replaceable blade for 1/2" – 2" tubeAccessories: No. 126 Facing Cutter – Replaceable hardened steel insert.Fitting Brushes – Small internal brushes for refrigeration and air conditioning.Cat. No. Model No. Description Wt. (lbs)47395 126 4" Facing Cutter 1-3/446425 E-6128 2" to 4" Brush Arbor 1/446450 E-6212-X 5" to 6" Brush Arbor 1-1/442295 D-1415 External Brush 3/4Std.-Duty Brushes Brushes for No. 124 MachineCat. No. Model No. Description Wt. (oz)42245 E-5715 3/8" Fitting Brush 142250 E-5720 1/2" Fitting Brush 142255 E-5721 3/4" Fitting Brush 142260 E-5722 1" Fitting Brush 242265 E-5723 1-1/4" Fitting Brush 242270 E-5724 1-1/2" Fitting Brush 442275 E-5725 2" Fitting Brush 642280 E-5726 2-1/2" Fitting Brush 842285 E-5727 3" Fitting Brush 1042290 E-5728 4" Fitting Brush 14**42300 **D-1545 5" Fitting Brush 16— — 6" Fitting Brush 18**Requires Brush Arbor Catalog No. 46450RidgidModel S TubeExpanderThis single-stage expanderis designed to expand tubingfor fast, accurate joints insoft copper, aluminum and softsteel tube without using fittings.The mechanism is free-floatingand self-centering.WWW.HANESSUPPLY.COM<strong>Hand</strong> <strong>Tools</strong>Cat. Model Tube Cap. Wt.No. No. Description O.D. Nominal (lbs)30032 S Kit with 1/2", 5/8", 7/8" Heads and Case – – 634152 S Kit with 3/8", 1/2", 3/4", 1" Heads and Case – – 6-1/215071 S Expander <strong>Hand</strong>le – – 1/210251 – Expander Head 3/8 1/4 1/210261 – Expander Head 1/2 3/8 1/210271 – Expander Head 5/8 1/2 1/210281 – Expander Head 3/4 5/8 1/210291 – Expander Head 7/8 3/4 1/210301 – Expander Head 1 – 1/210311 – Expander Head 1-1/8 1 1/210321 – Expander Head 1-1/4 – 1/210341 – Expander Head 1-1/2 – 1/210351 – Expander Head 1-5/8 1-1/2 1/210361 – Expander Head 1-3/4 – 1/258747 – Replacement Case – – 3Note: Kit Head sizes are given by Tube O.D. Replacement Case Catalog No. 58747Swaging <strong>Tools</strong>• RIDGID Swaging <strong>Tools</strong> are quality-madeand zinc-plated for accuracy and durability.• Set of four tools is packagedin handy vinyl pouch.• Designed for copper, aluminum or brass.Cat. Model O.D. Cap. Wt.No. No. Description (in) (oz)52420 570 Kit-4 <strong>Tools</strong> 1/4, 3/8, 1/2, 5/8 1652425 562 Swaging Tool 1/4 252430 563 Swaging Tool 3/8 452435 564 Swaging Tool 1/2 552440 565 Swaging Tool 5/8 8No. 575 EMT Sizing Tool for ConduitQuickly resizes thin-wall conduitends that have become deformedafter installation. Tool can also beused for slight bending of 1/2" and 3/4" conduitends for alignment purposes. Hardened alloy steel resists wear.Cat. Model Wt.No. No. Cap. (lbs)36005 575 1/2" and 3/4" EMT 1-3/8No. 127 Inner-Outer Reamer• <strong>Hand</strong>y for quick, clean and easy I.D. reaming and O.D. beveling of 1/4"through 1 1/2" nominal water tube.• Plastic construction with long-wearing alloy steel blades.• Gives fast, professional reaming oncopper, aluminum, brass and other types of tubing.Cat. Model Wt.No. No. Cap. (oz)34965 127 1/4" through 1-1/2" Nominal Water Tube 4Hardened Steel ConstructionInner-Outer Reamer• 46 cutting edges on interior cone allow for fast,clean, inner reaming and outer deburring/bevelingof 1/2"-2" copper and stainless steel tubing.• Hardened steel constructionCat. Model Wt.No. No. Cap. (oz)29983 223S 1/4 through 1-1/4 Copper and Stainless Tubing 3/429993 227S 1/2 through 2 Copper and Stainless Tubing 1-1/4<strong>19</strong>-139<strong>19</strong><strong>Hand</strong> <strong>Tools</strong>