19-Hand Tools (125-174).50_200310.qxd - Hanes Supply, Inc

Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930Visit us online at www.hanessupply.com819 Nipple Chuck Kit• Holds short or close nipples for threading.• For use with 300 Power Drive, 535and 1822 (with adapter kit) and1224 Threading Machines.• Standard Nipple Chuck includesinsert and 5 adapters: 1/2", 3/4",1", 1-1/4" & 1-1/2". (Nipple Chuckbody serves as 2" Adapter.)Cat. No. Model No. Description Wt. (lbs)51005 819 NPT Nipple Chuck 1/2" – 2" 1068160 819 BSPT Nipple Chuck 1/2" – 2" 1051020 D-380-X Nipple Chuck Wrench 1/435867 839 Adapter Kit for 1822 Machine 16-1/262457 1219 NPT Nipple Chuck for 1215 5-3/462462 1219 BSPT Nipple Chuck for 1215 5-3/4Pipe AdaptersFor use with No. 819 Nipple Chuck to allow close nipple threadingof all sizes of pipe smaller than 2 inches.NPT StandardBSPT StandardSize (in) Cat. No. Model No. Cat. No. Model No. Wt. (lbs)1/8 51040 E-729 – – 1/21/4 51045 E-730 68195 E-730-B 1/23/8 51050 E-731 68200 E-731-B 1/21/2 51055 E-732 68165 E-732-B 1/23/4 51060 E-733 68170 E-733-B 1/21 51065 E-734 68175 E-734-B 1/21-1/4 51070 E-735 68180 E-735-B 1/21-1/2 51075 E-736 68185 E-736-B 1/2Beveling DiesFor beveling pipe prior to welding. A set of beveling diesconsists of three guide segments and one cutting segment.Cat No. DescriptionPipeSize (in)Used inDie Head Wt52192 37 1/2° Bevel Die Set 1/2-3/4 Universal 150960 37 1/2° Bevel Die Set 1-2 Universal 152202 45° Bevel Die Set 1/2-3/4 Universal 150965 45° Bevel Die Set 1-2 Universal 1Cut Grooving DiesTo cut groove pipe for mechanical type couplings,consult chart for sizes and die head information.Cat No. DescriptionPipeSize (in)Used inDie Head Wt52217 Grooving Die Set 1/2-3/4 Universal 150985 Grooving Die Set 1-2 Universal 1Note: 2 1/2-4 Beveling Dies are available for the No. 1224 threading Machine.See accessories for No. 1224. Note: Universal Dies fit all Universal Die Heads.PIPE FABRICATIONRoll Groover/Model No. 915The new RIDGID 915 Roll Groover isa manual roll groover for in-place fieldapplications. The 915 requires only 3-1/2" of clearance to travel around a pipeand a minimum of 2 3/4" of exposedpipe for grooving. With the appropriateroll sets, the 915 can groove from 1 1/4"to 12" pipe, the widest range in its class!The 915’s cast-in handle allows for easytransport or chaining the groover downto prevent theft. The 915 is a must for service work crews.RidgidRoll Groover/Model No. 915 (continued)Hand ToolsFeatures:• Lightweight design – only 23 pounds.• Easy roll set change out – up to 12" pipe capacityin one unit for service versatility.• Cast-in carrying handle – easy to transport or lock up to prevent theft.• Included ratchet – 90 degree bend-in handle makes grooving easier.• Available customized tool box – holds 915 grooverand all available roll sets.• Easy to use depth setting gauge – helps make accurate grooves.Specifications:Capacity: 1-1/4" - 12" Sch. 10 Steel and Stainless Steel Pipe1-1/4" - 6" Sch. 40 Steel Pipe, 1-1/4"-2" Sch. 40 Stainless Steel PipeOperation: Feed screw with 1/2" ratchet wrench (included).Weight: 23 lbs. including ratchetStandard Equipment:915 Roll Groover with 2" - 6" Sch. 10 (2" - 3 1/2" Sch. 40).Roll Set Ratchet WrenchCat NoModelNoDescriptionWeight(lb)88232 915 915 Roll Groover with 2" - 6" Sch. 10 (2" - 3 1/2" Sch. 40) Roll Set 2392437 – Drive and Groove Roll Set for 11/4" - 11/2" Sch.210 or 40 Steel, Stainless Steel, PVC92447 – Drive and Groove Roll Set for 4" - 6" Sch. 40 Steel,4-1/2Stainless Steel, PVC92442 – Drive and Groove Roll Set for 8" - 12" Sch. 10 Steel,4-1/2Stainless Steel, PVC92452 – Drive and Groove Roll Set for 2" - 8" Copper2Tube Type K, L, M, and DWV93497 – 915 Tool Box 21-1/276827 – Metric Diameter Tape 1/276822 – English Diameter Tape 1/2Roll Groover/Model No. 916The RIDGID Model 916 Roll Groover is the most durable and efficientlightweight portable unit available. Built with a solid, durable cast-ironhousing, it withstands heavy usage, yet is light enough for easytransportation. The 916 features a patented single stroke feedmechanism that allows for accurate operation quickly and effortlessly.• Specifically designed for field serviceroll grooving applications.• Quick and easy mount to RIDGIDNos. 300 Power Drive,535 or 1822 Threading Machines.• Cam-type feed actuation – translatesinto minimum operatoreffort to form roll grooves.• Durable cast-iron housing withstandsextensive field use.• Depth adjustment screw separatefrom feed mechanismallows for consistent groove depth.• Lightweight, only 33 lbs., allows for easy transport and storage.• Integral feed handle is part of overall unit. No extra tools required.• Optional Roll Sets for: Copper 2"- 6" (Types K, L, M, DWV),1" Sch. 10, 40 steel pipe.• Optional 1¼"-1½" and 2"- 6" AWWA Roll Sets.• Easy serviceability – drive and groove rolls are easy to change.– continues –19Hand Tools– continues –WWW.HANESSUPPLY.COM19-131