10.07.2015 Views

2011 Jeep Grand Cherokee User Guide

2011 Jeep Grand Cherokee User Guide

2011 Jeep Grand Cherokee User Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

GETTING STARTEDREAR SEATS60/40 Split Rear SeatTo Lower Rear Seatback• With the front seats fully upright andpositioned forward, pull upward on therelease lever and fold the rear seatbackdown.To Raise Rear Seatback• Raise the rear seatback and lock it intoplace.To Recline Rear Seatback• To recline the seatback, lean forward before lifting the handle, then lean back to thedesired position and release the handle. Lift the handle to return the seatback to anupright position.HEATED/VENTILATED SEATSFront Heated Seats• The controls for front heated seats arelocated near the bottom center of theinstrument panel (below the ClimateControls).• Press the switch once to select High-levelheating. Press the switch a second timeto select Low-level heating. Press theswitch a third time to shut the heatingelements Off.• If the High-level setting is selected, the system will automatically switch to Low-level afterapproximately 55 minutes. The Low-level setting will turn Off automatically afterapproximately 45 minutes.Front Ventilated Seats• Located in the seat cushion and seatback are small fans that draw the air from thepassenger compartment and blow air through fine perforations in the seat cover tohelp keep the driver and front passenger cooler in higher ambient temperatures.• There are two ventilated seat switches that allow the driver and passenger to operate theseats independently. The ventilated seat switches are located on the switch bank in thecenter stack of the instrument panel, just below the climate controls. The ventilated seatswitches are used to control the speed of the fans located in the seat. Press the switchonce to choose HIGH, press it a second time to choose LOW. Pressing the switch a thirdtime will turn the ventilated seat OFF. When HIGH speed is selected both lights on theswitch will be illuminated. When LOW speed is selected one light will be illuminated.19

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!