19.11.2012 Views

2011 Environmental Statement 1.8 MB - Sappi

2011 Environmental Statement 1.8 MB - Sappi

2011 Environmental Statement 1.8 MB - Sappi

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Appendix 3<br />

Clarification of facts and figures (Appendix 2 and paragraph 3.12)<br />

Production<br />

End product reel paper based on <strong>Sappi</strong> annual<br />

figures for <strong>2011</strong>.<br />

Energy<br />

Total internal use of electricity based on invoices.<br />

Air<br />

NO (total)<br />

gas turbine and boiler 6<br />

steam boilers 5 and 7<br />

infrared jets<br />

mixed-air heaters<br />

Water<br />

As of 2008, groundwater consumption is recorded<br />

on the basis of calibrated measurements.<br />

Pollution units for <strong>2011</strong> are based on internal<br />

calculations.<br />

As of 2007, chloride volumes are analysed by<br />

accredited laboratories.<br />

Phosphate recorded while measured, according<br />

to measurement deposition.<br />

Waste (non-hazardous)<br />

Industrial waste consists of general waste<br />

from the production process, waste wood<br />

and sewage sludge.<br />

Re-usable waste consists of metal, wood<br />

(pallets, based on 15 kg per pallet) and paper<br />

waste (paper/board/cylinders).<br />

Not included are packaging materials such as<br />

barrels, big-bags and pallets (as these are returnable).<br />

Volumes of used oil are indicated in kilograms,<br />

based on conversion using the following<br />

formula: used oil (litres) x specific mass<br />

(0.9 kg/l).<br />

36 <strong>Environmental</strong> <strong>Statement</strong> <strong>2011</strong><br />

Comparison to BAT-Bref / IPPC /<br />

E-PRTR (paragraph 3.12)<br />

Emission levels for BOD5, COD, Total Suspended<br />

Solids, Total P and Total N have<br />

been calculated by dividing year load by<br />

net production (Net Saleable Product).<br />

Emission levels are listed in Appendix 2.<br />

Debit emission level has been calculated by<br />

dividing the purification plant waste water<br />

totals from Appendix 2 by Net Saleable<br />

Product.<br />

The emission level for electricity has been<br />

calculated by dividing Electricity, total consumption<br />

from Appendix 2 by Net Saleable<br />

Product.<br />

The emission level for process heat has<br />

been calculated by multiplying gas consumption<br />

from Appendix 2 by the calorific<br />

value of gas (0.03165 GJ/m 3 ) and dividing<br />

the outcome by Net Saleable Product.<br />

Gas supply emission level has been calculated<br />

by dividing the NO emission (in mg)<br />

from Appendix 2 by the calorific value of<br />

total gas consumption (gas consumption<br />

multiplied by calorific value of gas (31.65<br />

MJ/m 3 ).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!