domus - the complete solution - CMS

THERMAPIPE500 m 3 /hr plusTHERMAPIPE 150Product Code Description Dimensions Pressure loss.pa Notes i.d. = internal dimensionBoxed Prepack mm 15 l/s 30 l/s 60 l/s Co.K* o.d. = outer dimension6TP100 n/a Standard Round Pipe, 1m6TP200 n/a Standard Round Pipe, 2m● 150 0.1 0.4 1.2 0.22● 150 0.2 0.8 2.4 -Fits over components with 150mmo.d. round spigots e.g. 6TP90,6TP92M, 593/4/5, wall outlets andappliance spigots.6TP90 n/a 90º BendO 150 1.0 4.2 18.2 2.41Fits into 150mm i.d. round pipe toconnect two lengths together at90°.6TP92M n/a Equal T-Piece, metalO 150Figures vary on installationFits into 150mm i.d. round pipe toprovide a round ducting junction ina multi-extraction installation.6TP2SL n/a Insulated Sleeve, 2m● 154 - - - -Fits over EasiPipe 150 to createThermaPipe 150. Can be cut torequired length.THERMAPIPE ACCESSORIES10TP12 n/a Thermal Insulation Sheet50TP45 n/a Aluminium Duct SealingTape, 45m length1m x 1.2m - - - -50mm - - - -widthA small section of thermalinsulation for use with awkwardinsulations, or to insulate smallcomponents.It is recommended that insulationjoints should be sealed usingaluminium duct tape, ensuring aprofessional finish.● = internal dimension O = outer dimension * Pressure loss Coefficient KPlease refer to pages 9-13 forWall Outlets for this rangeDIMENSIONSThermaPipe 100Pipe internal dimensions are 100mmand fit over system parts spigots.Cross section: 7850 sq mmPipe weight incl. insulation: 730 g/mPipe wall thickness: 1.66mmInsulation thickness: +5mm approx.ThermaPipe 125Pipe internal dimensions are 125mmand fit over system parts spigots.Cross section: 12266 sq mmPipe weight incl. insulation: 925 g/mPipe wall thickness: 1.66mm approx.Insulation thickness: +5mm approx.ThermaPipe 150Pipe internal dimensions are 150mmand fit over system parts spigots.Cross section: 17663 sq mmPipe weight incl. insulation: 1090 g/mPipe wall thickness: 1.75mm approx.Insulation thickness: +5mm approx.100mm1.66mm approx125mm1.66mm approx150mm1.75mm approx32