1633 Combustion Controller Manual - Novatech Controls

SET-UP MODE SUMMARY5.1 SET-UP MODE FUNCTIONS1. Calendar Year2. Calendar Month3. Calendar Day4. Real time clock Hour5. Real time clock Minutes6. Reference voltage #17. Reference voltage #28. Reference voltage #39. Reference voltage #410. Probe offset11. Output channel number 1 calibration12. Output channel number 1 calibration, 4mA trim13. Output channel number 1 calibration, 20mA trim14. Output channel number 2 calibration15. Output channel number 2 calibration, 4mA trim16. Output channel number 2 calibration, 20mA trim17. Service record year18. Service record month19. Service record day20. Probe Type21. Probe Thermocouple Type22. Auxiliary Thermocouple Type23. Transmitter Output Channel 1 scale24. Transmitter Span Channel 1Set-up steps 25 to 27 will be skipped automatically if ‘4-20mA FWD’ or ‘4-20mA REV’ is selected in set-up step 60.25. Transmitter Output Channel 2 scale26. Transmitter Zero Channel 227. Transmitter Span Channel 228. Centigrade / Fahrenheit Selection29. Lower Line Display Functions30. Flue Pressure mm / inches / kilopascals31. Flue Pressure Value32. Automatic Purge / Cal?Set-up steps 32 will be skipped automatically if ‘Neither’ is selected in set-up step 33.33. Purge / Cal Start TimeSet-up steps 34 to 36 will be skipped automatically depending on the selection in set-up step 32.34. Time between Purges35. Purge Duration36. Purge Freeze TimeSet-up steps 37 to 42 may be skipped automatically depending on the selection in set-up step 32.37. Oxygen Content of Cal Gas38. Maximum Acceptable Positive Error Gas39. Maximum Acceptable Negative Error Gas40. Period Between Gas Autocal Checks41. Duration of Gas Autocal Check42. Duration of Freeze Time43. Process alarm enableSet-up steps 44 to 51 will be skipped automatically if ‘No’ is selected in set-up step 43.44. High oxygen alarm level45. High oxygen alarm delay timeAugust 200942 1633 Combustion Controller