Carbon UART PL011 Model User Guide for SoC Designer
Carbon UART PL011 Model User Guide for SoC Designer
Carbon UART PL011 Model User Guide for SoC Designer
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1-16 Using the <strong>Model</strong> Kit Component in <strong>SoC</strong> <strong>Designer</strong> Plus1.5.1.3 Primecell ID RegistersTable 1-7 shows the Primecell ID registers.Table 1-7 Primecell ID Registers SummaryBase Offset Name Description Type Reset Value0xFF0 <strong>UART</strong>PCellID0 <strong>UART</strong>PCellID0 Register. Always setto reset value.0xFF4 <strong>UART</strong>OCellID1 <strong>UART</strong>PCellID1 Register. Always setto reset value.0xFF8 <strong>UART</strong>PCellID2 <strong>UART</strong>PCellID2 Register. Always setto reset value.0xFFC <strong>UART</strong>PCellID3 <strong>UART</strong>PCellID3 Register. Always setto reset value.RORORORO0x000d0x00f00x00050x00b11.5.1.4 Transmit FIFO RegistersTable 1-8 shows the Transmit FIFO registersTable 1-8 Transmit FIFO Registers SummaryName Description TypeTxFIFOTip Register being transferred ROTxFIFOBase Last register written ROTxFIFOSize Difference between Tip and Base ROTxFIFOElement0-15 Transmit FIFOs RO1.5.1.5 Receive FIFO RegistersTable 1-9 shows the Receive FIFO registersTable 1-9 Receive FIFO Registers SummaryName Description TypeRxFIFOTip Register being received RORxFIFOBase Last register read RORxFIFOSize Difference between Tip and Base RORxFIFOElement0-15 Receive FIFOs RO<strong>Carbon</strong> Design Systems, Inc. Confidential
Change language