General Catalogue 2007 - Ibemo Kazakhstan Ltd

Established for over 15years,
Tebis provides an alternative and
simplistic approach to control.
Tebis utilises a bus-based
approach to control, offering
benefits such as increased
Flexibility, Functionality, Future
proofing and Safety.
Tebis differs from a conventional
installation in that there are two
distinct circuits; one for power
and one for control. With a
conventional installation power
and switching are combined,
which can often be complex
when multi-way switching is
required.
Wiring simplicity is achieved with
Tebis, as the only devices cabled
on the LV (240V ac) side are the
loads. All controls for these loads
are connected to the bus circuit,
which is rated at 30V DC.
Flexibility
The function of any switch can
be changed at any time,
without the need to touch the
wiring.
5.0
Tebis TX
- Building Automation
Functionality
A single load can be
controlled from several
positions. Conversely several
loads can be controlled from
one position.
Future proofing
Tebis can work with any brand
of pushbuttons giving you the
choice both now and in the
future. Adding extra control
points is simply achieved by
extending the control bus.
Safety
The control bus voltage is 30V
DC thus increasing the safety
of the installation and reducing
the risk of electrocution.
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com